Author Topic: Cannot connect, SMB 1.0 not supported  (Read 7286 times)

Offline ARKA

  • Newbie
  • Posts: 2
  • Helpful Contribution Status: +0/-0
Cannot connect, SMB 1.0 not supported
« on: January 03, 2019, 05:24:22 PM »
Since the latest windows update.
I cannot connect to my mede8er anymore trough explorer.
see attachement (in dutch)
which says that windows will not connect to a device with smb1 or lower.

Is there any support?
Can someone give the sourcecode free so the community can repair it for themself?

Hope to hear from someone from mede8er.

Offline jer1956

  • Global Moder8or
  • M8er Addict
  • *****
  • Posts: 17 395
  • Helpful Contribution Status: +203/-55
Re: Cannot connect, SMB 1.0 not supported
« Reply #1 on: January 03, 2019, 06:40:05 PM »
Microsoft are making it difficult to force users to upgrade other kit.
SMB1 can be turned back on using Windows Features. Even then Network Discovery will avoid SMB1. You have to use Map Network Drive.

Offline ARKA

  • Newbie
  • Posts: 2
  • Helpful Contribution Status: +0/-0
Re: Cannot connect, SMB 1.0 not supported
« Reply #2 on: January 09, 2019, 08:06:01 PM »
Hey jer1956,
Thanks for the lead, I've had to do some searching, but I found it. :)
I'm using Windows 10 Home Edition Dutch.
So for those with the same problem:
Ga naar Instellingen - Apps - Apps en Onderdelen.
Ga helemaal naar onderen, ga naar Verwante Instellingen, Programma's en functies.
In de nieuwe window, linkerkant, ga naar Windows-onderdelen in-of uitschakelen.
In deze nieuwe window kun Ondersteuning voor SMB 1.0/CIFS aan en uitzetten.

Let op, deze instelling is niet voor niets door Microsoft uitgezet.
aanzetten is een beveiligingsrisico!

Offline Hemmiej

  • Newbie
  • Posts: 1
  • Helpful Contribution Status: +0/-0
Re: Cannot connect, SMB 1.0 not supported
« Reply #3 on: January 07, 2020, 10:00:22 PM »
Thanks,
Had hetzelfde probleem na aankoop nieuwe pc. Nu opgelost. Superbedankt

Offline ch90

  • Active Member
  • *
  • Posts: 96
  • Helpful Contribution Status: +1/-0
Re: Cannot connect, SMB 1.0 not supported
« Reply #4 on: March 01, 2021, 10:56:33 AM »
Hello,

I am having the same problem since last week, not sure why it was working well. Smb 1 is enabled but I hve the error message mentioned previously.

Any ideas?

All the best, Chris

Offline LarryM8

  • Newbie
  • Posts: 36
  • Helpful Contribution Status: +0/-0

Offline ch90

  • Active Member
  • *
  • Posts: 96
  • Helpful Contribution Status: +1/-0
Re: Cannot connect, SMB 1.0 not supported
« Reply #6 on: March 04, 2021, 12:09:47 PM »
Maybe the following article will help.
https://docs.microsoft.com/en-us/troubleshoot/windows-server/networking/guest-access-in-smb2-is-disabled-by-default

Thanks Larry, I've enable smb 2 but the drive still doesn't show.

I've a feeling it is going to be a tough one  :'(

Offline eceeq

  • Newbie
  • Posts: 5
  • Helpful Contribution Status: +0/-0
Re: Cannot connect, SMB 1.0 not supported
« Reply #7 on: March 05, 2021, 08:58:19 AM »

Offline ch90

  • Active Member
  • *
  • Posts: 96
  • Helpful Contribution Status: +1/-0
Re: Cannot connect, SMB 1.0 not supported
« Reply #8 on: March 06, 2021, 02:44:09 PM »
Perhaps you can find here something:

http://woshub.com/cannot-access-smb-network-shares-windows-10-1709/

It is a good resource, I tried all recipes to no avail. Thanks anyway.

Offline Yupster

  • Newbie
  • Posts: 1
  • Helpful Contribution Status: +0/-0
Re: Cannot connect, SMB 1.0 not supported
« Reply #9 on: April 27, 2021, 07:38:56 PM »
Did anyone have any luck with this problem?

I have the same since upgrading 10 to 20H2.

I don't get an error message, just logon fail!