Author Topic: Problems Setting Up NFS on 1000X3D and Synology  (Read 15211 times)

Offline hdmkv

  • B8a Tester - 1000X3D
  • Experienced Member
  • ****
  • Posts: 205
  • Helpful Contribution Status: +0/-1
Problems Setting Up NFS on 1000X3D and Synology
« on: September 19, 2012, 02:12:20 PM »
Tried to set-up NFS as instructed, but just keeps showing 'Failed' on 1000X3D. Same NFS connection works fine via my Boxee Box. Also works fine via HiMedia HD900B, another RTD1186 streamer, as it has a NFS dicovery feature that returns all NFS shares and you can just pick the ones you want to add to 'Favorites'.

What am I doing wrong? On my Synology DS1812+ with DSM 4, I did exactly as instructed above. The shares I tried this on are /volume1/Movies 3D and I also tried a share without any spaces in the name: /volume2/Videos. Neither work on 1000X3D, where I get a 'Failed' message after I try to open the share I've added as instructed.
(2x) MED600X3D (HDMI Auto, auto frame rate, RAW 7.1 audio)
Firmware: Always Latest Beta
Networked via CAT5e
Streaming from Synology DS1812+ NAS via NFS
BenQ W1070 projector with 133" 16x9 Da-lite High Power screen
Audio connection via HDMI to Denon AVR-1913 receiver
Audio output to Pioneer SP 'Andrew Jones' 7.1 speaker system
Also networked: HTPC's, Fire TV's, Roku, PS3

Offline NoZEM

  • Newbie
  • Posts: 10
  • Helpful Contribution Status: +0/-0
Re: Problems Setting Up NFS on 1000X3D and Synology
« Reply #1 on: September 19, 2012, 04:17:13 PM »
Hi mdmkv,

Please read here http://wiki.xbmc.org/index.php?title=NFS and start reading from NFS sharing from commercial NAS systems such as Synology or QNAP
Don't forget to apply cat /etc/export

Good luck.
MED600X3D -> HDMI -> Marantz NR1603
Streaming from Synology 212+ NAS -> NFS
Philips 40PFL9705
___________________________________
Bedroom: MED600X3D -> HDMI -> Philips 32PFL9604
Streaming from Synology 212+ NAS -> NFS

Offline couto

  • B8a Tester - 1000X3D
  • Hero Member
  • ****
  • Posts: 853
  • Helpful Contribution Status: +7/-2
Re: Problems Setting Up NFS on 1000X3D and Synology
« Reply #2 on: September 19, 2012, 09:01:41 PM »
Tried to set-up NFS as instructed, but just keeps showing 'Failed' on 1000X3D. Same NFS connection works fine via my Boxee Box. Also works fine via HiMedia HD900B, another RTD1186 streamer, as it has a NFS dicovery feature that returns all NFS shares and you can just pick the ones you want to add to 'Favorites'.

What am I doing wrong? On my Synology DS1812+ with DSM 4, I did exactly as instructed above. The shares I tried this on are /volume1/Movies 3D and I also tried a share without any spaces in the name: /volume2/Videos. Neither work on 1000X3D, where I get a 'Failed' message after I try to open the share I've added as instructed.

im sure you  are doing the correct procedure...... /volume1/videos

this is the ip address of micca and med1000x3d ending in 103 and 104 (sorry is in portuguese language)





in nfs eliminate all nfs client on right side

add new > put the synology ip address > and the /volume1/videos >ok

if is not working is a bug in x3 or privileges in synology
try to add a manually ip address in x3 with new privileges in synology

ps: i dont have favorites in nfs or samba in x3





Med1000X3D
Anthem MRX-310
Mitsubishi HC5
LG Oled 1080P
100 inch screen
Video setting: 23,976Hz On, auto frame ON
Media Source: Wired Network > ds412+ synology
Router. Linksys E4200
Protocol : UDP 32K
Media Files:ISO 3D, MKV, FLAC

Offline jer1956

  • Global Moder8or
  • M8er Addict
  • *****
  • Posts: 17 340
  • Helpful Contribution Status: +198/-55
Re: Problems Setting Up NFS on 1000X3D and Synology
« Reply #3 on: September 20, 2012, 12:37:41 PM »
One common mistake is not to put the first "/" in before the drive letter in the share name on the Med Setup.

Offline Maasbommel

  • Global Moder8or
  • M8er Addict
  • *****
  • Posts: 11 503
  • Helpful Contribution Status: +51/-8
Re: Re: Re: Problems Setting Up NFS on 1000X3D and Synology
« Reply #4 on: September 20, 2012, 02:30:42 PM »
One common mistake is not to put the first "/" in before the drive letter in the share name on the Med Setup.

Path on mede8er needs the /
So e.g. /volume1/Movies
If share is called Movies

Without the / it not works to connect to my Synology share.

Setting up the NFS privilige rule is important.

And be aware of capitals - case sensitive.

sent by mobile with Tapatalk
Read the  Mede8er 400X/500X Beginners Guide
or Mede8er 500X2/400X2/450X2 Beginners Guide

Also check the Couto X3D Newbies Guide first.

Please don't PM me but post on the forum.

Offline Maasbommel

  • Global Moder8or
  • M8er Addict
  • *****
  • Posts: 11 503
  • Helpful Contribution Status: +51/-8
Re: Re: Re: Problems Setting Up NFS on 1000X3D and Synology
« Reply #5 on: September 20, 2012, 02:31:40 PM »
One common mistake is not to put the first "/" in before the drive letter in the share name on the Med Setup.

Path on mede8er needs the /
So e.g. /volume1/Movies
If share is called Movies

Without the / it not works to connect to my Synology share.

Setting up the NFS privilige rule is important.

And be aware of capitals - case sensitive.

sent by mobile with Tapatalk
Read the  Mede8er 400X/500X Beginners Guide
or Mede8er 500X2/400X2/450X2 Beginners Guide

Also check the Couto X3D Newbies Guide first.

Please don't PM me but post on the forum.

Offline hdmkv

  • B8a Tester - 1000X3D
  • Experienced Member
  • ****
  • Posts: 205
  • Helpful Contribution Status: +0/-1
Re: Problems Setting Up NFS on 1000X3D and Synology
« Reply #6 on: September 20, 2012, 03:02:12 PM »
Did the "/", specifically "/volume1/Movies 3D", but didn't work. In Synology, when enabling NFS privileges for each share, it shows you the exact mount path. Like I said, I can get Boxee Box to connect via NFS by just browsing to it, but as there's no browse for NFS in Mede8er, I need to keep trying different things. Plan to spend some more time this weekend.
(2x) MED600X3D (HDMI Auto, auto frame rate, RAW 7.1 audio)
Firmware: Always Latest Beta
Networked via CAT5e
Streaming from Synology DS1812+ NAS via NFS
BenQ W1070 projector with 133" 16x9 Da-lite High Power screen
Audio connection via HDMI to Denon AVR-1913 receiver
Audio output to Pioneer SP 'Andrew Jones' 7.1 speaker system
Also networked: HTPC's, Fire TV's, Roku, PS3

Offline hdmkv

  • B8a Tester - 1000X3D
  • Experienced Member
  • ****
  • Posts: 205
  • Helpful Contribution Status: +0/-1
Re: Problems Setting Up NFS on 1000X3D and Synology
« Reply #7 on: September 23, 2012, 09:44:03 PM »
Finally able to connect to 1000X3D via NFS, but as I'm getting worse performance than with SMB, maybe I'm doing something wrong. Here's my exact setup. What else do I need to do?





(2x) MED600X3D (HDMI Auto, auto frame rate, RAW 7.1 audio)
Firmware: Always Latest Beta
Networked via CAT5e
Streaming from Synology DS1812+ NAS via NFS
BenQ W1070 projector with 133" 16x9 Da-lite High Power screen
Audio connection via HDMI to Denon AVR-1913 receiver
Audio output to Pioneer SP 'Andrew Jones' 7.1 speaker system
Also networked: HTPC's, Fire TV's, Roku, PS3

Offline hdmkv

  • B8a Tester - 1000X3D
  • Experienced Member
  • ****
  • Posts: 205
  • Helpful Contribution Status: +0/-1
Re: Problems Setting Up NFS on 1000X3D and Synology
« Reply #8 on: September 23, 2012, 09:59:57 PM »
By the way, just tried this as posted here. Still getting stutter on some high bitrate 3D BDs.

(2x) MED600X3D (HDMI Auto, auto frame rate, RAW 7.1 audio)
Firmware: Always Latest Beta
Networked via CAT5e
Streaming from Synology DS1812+ NAS via NFS
BenQ W1070 projector with 133" 16x9 Da-lite High Power screen
Audio connection via HDMI to Denon AVR-1913 receiver
Audio output to Pioneer SP 'Andrew Jones' 7.1 speaker system
Also networked: HTPC's, Fire TV's, Roku, PS3

Offline Maasbommel

  • Global Moder8or
  • M8er Addict
  • *****
  • Posts: 11 503
  • Helpful Contribution Status: +51/-8
Re: Problems Setting Up NFS on 1000X3D and Synology
« Reply #9 on: September 24, 2012, 06:45:31 AM »
Put Asynchronous of and be sure to have jumbo frames off.
Then reboot your Synology nas and try again.

You have some NFS setup issue as performance of NFS should always be better then samba.
« Last Edit: September 24, 2012, 07:16:59 AM by Maasbommel »
Read the  Mede8er 400X/500X Beginners Guide
or Mede8er 500X2/400X2/450X2 Beginners Guide

Also check the Couto X3D Newbies Guide first.

Please don't PM me but post on the forum.

Offline hdmkv

  • B8a Tester - 1000X3D
  • Experienced Member
  • ****
  • Posts: 205
  • Helpful Contribution Status: +0/-1
Re: Problems Setting Up NFS on 1000X3D and Synology
« Reply #10 on: September 24, 2012, 11:15:17 PM »
Tried it. Same issues with bad stuttering. I give up on NFS... sticking with SMB. Appreciate your help however. With the improvements in SMB with the 21 Sept 2012 firmware, I can live with the minor (30 seconds or so) hiccup I get when jumping ahead some chapters. The 1000X3D recovers and resumes playing smoothly. If you guys can further improve SMB performance, that would fix the issue with high bitrate 3D BD's once and for all.
(2x) MED600X3D (HDMI Auto, auto frame rate, RAW 7.1 audio)
Firmware: Always Latest Beta
Networked via CAT5e
Streaming from Synology DS1812+ NAS via NFS
BenQ W1070 projector with 133" 16x9 Da-lite High Power screen
Audio connection via HDMI to Denon AVR-1913 receiver
Audio output to Pioneer SP 'Andrew Jones' 7.1 speaker system
Also networked: HTPC's, Fire TV's, Roku, PS3

Offline edcar

  • Newbie
  • Posts: 8
  • Helpful Contribution Status: +0/-0
Re: Problems Setting Up NFS on 1000X3D and Synology
« Reply #11 on: September 26, 2012, 05:13:58 PM »
Hello,

I have the same problem and the NFS does not function with 1000X3D
I have one Synology 1812+ and one synology 508 and the problem is the same one!

With Synology 1812+: 

Without Link Aggr

NFS -> function not and no means of making it function
UPnP -> All is ok, slow to find on the network, but functions.

With Link Aggr:

NFS -> function not and no means of making it function
UPnP -> function not and no means of making it function

For me the problem comes clearly from the 1000X3D
I tested with other Mediaplayer (Popcorn A-200, Popcorn A-300, and 3 models of Dune) ::) ::)
And all functions without problem. 8)
There is only the 1000X3D which does not recognize the NFS and (UPnP - with the Link Agg) >:( >:(

Apparently the service support is not ready to help us with this subject.

As a result I council with my using customer of the NAS in NFS, not to take 1000X3D and their council of the A-300 Popcorn.

It is sad because for the rest the 1000X3D is excellent. It is first Mediaplayer which I see managing all the codec with fluidity.



Offline couto

  • B8a Tester - 1000X3D
  • Hero Member
  • ****
  • Posts: 853
  • Helpful Contribution Status: +7/-2
Re: Problems Setting Up NFS on 1000X3D and Synology
« Reply #12 on: September 26, 2012, 05:27:34 PM »
Hello,

I have the same problem and the NFS does not function with 1000X3D
I have one Synology 1812+ and one synology 508 and the problem is the same one!

With Synology 1812+:  

Without Link Aggr

NFS -> function not and no means of making it function
UPnP -> All is ok, slow to find on the network, but functions.

With Link Aggr:

NFS -> function not and no means of making it function
UPnP -> function not and no means of making it function

For me the problem comes clearly from the 1000X3D
I tested with other Mediaplayer (Popcorn A-200, Popcorn A-300, and 3 models of Dune) ::) ::)
And all functions without problem. 8)
There is only the 1000X3D which does not recognize the NFS and (UPnP - with the Link Agg) >:( >:(

Apparently the service support is not ready to help us with this subject.

As a result I council with my using customer of the NAS in NFS, not to take 1000X3D and their council of the A-300 Popcorn.

It is sad because for the rest the 1000X3D is excellent. It is first Mediaplayer which I see managing all the codec with fluidity.


it strange that for some like mine with ds412+ (lfirmware  dsm 4.0-2219 ) is working and for you and hdmkv not working .

if matter im using my admin account to share the files in nfs and samba with x3
but create a new account to access outside of lan, dont interfere in same files.
guest account is disable

DS412+ >CAT5 >  E4200> CAT6 >  X3 (jumbo frames off)

fixed ip addres in x3
fixed ip addres in ds412+

no spaces or strange simbols in password or username  in ds412+  just letters and numbers


« Last Edit: September 26, 2012, 05:48:38 PM by couto »
Med1000X3D
Anthem MRX-310
Mitsubishi HC5
LG Oled 1080P
100 inch screen
Video setting: 23,976Hz On, auto frame ON
Media Source: Wired Network > ds412+ synology
Router. Linksys E4200
Protocol : UDP 32K
Media Files:ISO 3D, MKV, FLAC

Offline Maasbommel

  • Global Moder8or
  • M8er Addict
  • *****
  • Posts: 11 503
  • Helpful Contribution Status: +51/-8
Re: Problems Setting Up NFS on 1000X3D and Synology
« Reply #13 on: September 26, 2012, 05:38:58 PM »
My guess it is caused by something in between the 1000X3D and the Synology NAS.....
Used router - switches or both....

I am using a
Synology NAS 409Slim with DSM 4.1,-> Netgear router WNDR 3700 - to a Sitecom gbit switch - to another Sitecom gbit switch - to 1000X3D
NFS streaming without issues and better bandwith then samba on same Synology NAS.
Read the  Mede8er 400X/500X Beginners Guide
or Mede8er 500X2/400X2/450X2 Beginners Guide

Also check the Couto X3D Newbies Guide first.

Please don't PM me but post on the forum.

Offline edcar

  • Newbie
  • Posts: 8
  • Helpful Contribution Status: +0/-0
Re: Problems Setting Up NFS on 1000X3D and Synology
« Reply #14 on: September 26, 2012, 05:39:51 PM »
For the Synology my DSM is 3.1

But for my Synology 1812+ my DSM is 4.1 (the last version)