Author Topic: Feedback for -- V1.0.3 -- 30August 2012 XX OPEN BETA XX for MED1000X3D  (Read 22914 times)

Offline Domser

  • Newbie
  • Posts: 25
  • Helpful Contribution Status: +0/-0
Re: Feedback for -- V1.0.3 -- 30August 2012 XX OPEN BETA XX for MED1000X3D
« Reply #30 on: September 08, 2012, 11:24:15 AM »

Conclusion:
There is something wrong with network setup with this release, and maybe also with one of the previous open betas (need to go back to see where this crept in).
People using GUI update might still have a working Internet stream as I saw, when they used GUI update coming from a previous version where internet streams worked.
Gui update preserves the config, FW recovery mode update not.
That explains why doing the config restore from a working situation, somehow fixes the stream issue.
I expect something is wrong with DNS setup in this version, and maybe also in prev beta version.


Thanks a lot Maasbommel,
that explains a lot.

the 30.08 is the first firmware I have used and I actually used recovery mode to update it. So I actually had never set up the box before.
Thanks for taking the report serious and checking. That is something I really appreciate about Mede8er.
LG Cinema3D 55LW4500 / Sanyo PLV Z5
Mede8er MED1000X3D (FW 1.03 - 29.08.)

Offline Maasbommel

  • Global Moder8or
  • M8er Addict
  • *****
  • Posts: 11 187
  • Helpful Contribution Status: +51/-8
Re: Feedback for -- V1.0.3 -- 30August 2012 XX OPEN BETA XX for MED1000X3D
« Reply #31 on: September 08, 2012, 11:48:24 AM »
I just installed the 29 aug open beta.
That one works ok for me with internet streams when I install by FW recovery mode without doing a config restore.

Please do the same and verify if this fixes it for you too.
Read the  Mede8er 400X/500X Beginners Guide
or Mede8er 500X2/400X2/450X2 Beginners Guide

Also check the Couto X3D Newbies Guide first.

Please don't PM me but post on the forum.

Offline Domser

  • Newbie
  • Posts: 25
  • Helpful Contribution Status: +0/-0
Re: Feedback for -- V1.0.3 -- 30August 2012 XX OPEN BETA XX for MED1000X3D
« Reply #32 on: September 08, 2012, 12:00:40 PM »
I just installed the 29 aug open beta.
That one works ok for me with internet streams when I install by FW recovery mode without doing a config restore.

Please do the same and verify if this fixes it for you too.

Just did it and it worked immediately!

Thanks  ;)
LG Cinema3D 55LW4500 / Sanyo PLV Z5
Mede8er MED1000X3D (FW 1.03 - 29.08.)

Offline Skylinc

  • B8a Tester - 1000X3D
  • Hero Member
  • ****
  • Posts: 508
  • Helpful Contribution Status: +2/-0
Re: Feedback for -- V1.0.3 -- 30August 2012 XX OPEN BETA XX for MED1000X3D
« Reply #33 on: September 08, 2012, 05:47:57 PM »
Maas, will this be fixed in a future version? (Just curious)
Product: Mede8er MED1000X3D f/w v2.0.0 (5Feb2013)
Audio: HDMI > LG 42LW4500
Audio setting: HDMI Passthrough / Night mode Comfort
Video: HDMI output > LG 42" LED Cinema3D 42LW4500
Video setting: 1080p 50Hz, 23Hz ON,16:9
Media Source: Wired Network > Win 8 Professional SMB shares, OpenMediaVault Shares
Hard Drive: 2TB Western Digital

Offline jer1956

  • Global Moder8or
  • M8er Addict
  • *****
  • Posts: 17 318
  • Helpful Contribution Status: +203/-55
Re: Feedback for -- V1.0.3 -- 30August 2012 XX OPEN BETA XX for MED1000X3D
« Reply #34 on: September 08, 2012, 06:04:08 PM »
we would expect so. It's the holiday season so the number of devs testing is lower than usual..and key members  have been in Berlin drin....sorry promoting the x3. :D

Offline kulfsson

  • X3D Skin Designer
  • Active Member
  • ***
  • Posts: 52
  • Helpful Contribution Status: +0/-0
Re: Feedback for -- V1.0.3 -- 30August 2012 XX OPEN BETA XX for MED1000X3D
« Reply #35 on: September 09, 2012, 10:14:26 AM »
When using the Mede8er zoom function the navigation bar will no longer show and you are unable to navigate back and forth in the playing media.

Putting zoom to off will solve the issue and the navigation bar will show again.
Product & firmware version: Mede8er MED1000X3D f/w v2.0.0 (feb 5)
HDD: Western Digital 3 TB (WD30EZRX)
Audio: Optical output > Yamaha RX-V657 A/V Receiver
Audio setting: SPDIF Passthrough / Night mode OFF
Video: HDMI output > Samsung LED UE46ES6545
Video setting: 1080p 60Hz,24Hz ON,16:9
Media Source: HDD, Wired Network > Windows 7 SMB shares

Offline Maasbommel

  • Global Moder8or
  • M8er Addict
  • *****
  • Posts: 11 187
  • Helpful Contribution Status: +51/-8
Re: Feedback for -- V1.0.3 -- 30August 2012 XX OPEN BETA XX for MED1000X3D
« Reply #36 on: September 12, 2012, 05:58:42 AM »
Maas, will this be fixed in a future version? (Just curious)

Seems obvious to me....
Read the  Mede8er 400X/500X Beginners Guide
or Mede8er 500X2/400X2/450X2 Beginners Guide

Also check the Couto X3D Newbies Guide first.

Please don't PM me but post on the forum.

Offline Maasbommel

  • Global Moder8or
  • M8er Addict
  • *****
  • Posts: 11 187
  • Helpful Contribution Status: +51/-8
Re: Feedback for -- V1.0.3 -- 30August 2012 XX OPEN BETA XX for MED1000X3D
« Reply #37 on: September 12, 2012, 11:48:15 AM »
Locked - new open beta 12 sept.
Read the  Mede8er 400X/500X Beginners Guide
or Mede8er 500X2/400X2/450X2 Beginners Guide

Also check the Couto X3D Newbies Guide first.

Please don't PM me but post on the forum.