Mede8er Forum > Mede8er Products > MED500X2/MED400X2/MED400X2S/MED450X2 > Technical Issues > Connect 400X2 to PC via USB...
Pages: [1]   Go Down
« previous next »
Print
Author Topic: Connect 400X2 to PC via USB...  (Read 254 times)
Basil Plumley
Newbie

Offline Offline

Posts: 44
« on: April 06, 2012, 01:43:31 pm »
Is it possible to connect my 400X2 to my PC via USB and then read and use any external hard drives it has connected to the other USB socket?
Logged
Maasbommel
Global Moder8or
Hero Member
*****
Offline Offline

Posts: 8 416
« Reply #1 on: April 06, 2012, 01:53:21 pm »
Huh

Why do you want to do that? I cannot think of any reaso to do so. A 400X2 has no internal disk.
But the answer is no.
Logged
Read the  Mede8er 400X/500X Beginners Guide
or Mede8er 500X2/400X2/450X2 Beginners Guide

Also check the Technical Support Guidelines first.

Please don't PM me but post on the forum.
Basil Plumley
Newbie

Offline Offline

Posts: 44
« Reply #2 on: April 06, 2012, 06:13:17 pm »
Because it would be a darn sight quicker ripping Blu's to the connected external drive that in it is doing it over the network...this thing is slower than my old 500X.
And if I connect the external drives to my NAS I get stuttering beyond belief on all the rips on the connected drives...I can't win either way.
Logged
jer1956
Global Moder8or
Hero Member
*****
Offline Offline

Posts: 9 162
« Reply #3 on: April 06, 2012, 06:22:57 pm »
You should attach the external usb drive to your PC when ripping.  The X2 supports sharing servers,  but hasn't the power to work like a real NAS.

Anyone dropping in an X2 as a like for like replacment for an X1 is not going to treat it as a new player, but it should be, and your network tweaked again.
Logged
Pages: [1]   Go Up
Print
« previous next »
Jump to: