Author Topic: MED300X Firmware Update V1.5 -- 28 Nov 2011  (Read 4985 times)

Offline Mede8er1

  • Administr8or
  • Hero Member
  • ******
  • Posts: 3 739
  • Helpful Contribution Status: +94/-21
MED300X Firmware Update V1.5 -- 28 Nov 2011
« on: December 01, 2011, 08:32:44 am »
New update for MED300X

Changelog V1.5
1) Fixed Alpha sorting on USB fat32 Drives
2) Changed screensaver image
3) Selection of Font A or B in Setup Menu
4) Fixed aac sound in MOV file

MED300X INTERNATIONAL VERSION
http://www.mede8er.org/beta/Firmware_Final/MED300X/MED300X_V1.5_28Nov.rar

MED300X THAI VERSION
http://www.mede8er.org/beta/Firmware_Final/MED300X/MED300X_V1.5_28Nov(Thai).rar

Update Procedure
UnZIP or UnRAR the file and you will find one file named install.img. Copy this file to the root directory of a Flash Drive. Plug the flash drive into the Mede8er. Disconnect the power jack at the rear of the Mede8er then plug it back in - Now press the on/off button on the Mede8er (not the remote) and hold it pressed for 10 seconds and then release.

After approximately 15 seconds the LED on the Mede8er with flash red-blue and you will get a display of the progress of percentage installed on your TV display (some TV's will not display this) wait until the Mede8er re boots itself +- 180 sec. You Mede8er is now be updated.

DO NOT REMOVE POWER DURING THE EMERGENCY RECOVERY PROCEDURE.

Mede8er1
« Last Edit: March 01, 2012, 05:09:54 am by Mede8er1 »

Mede8er1
The Greatest Show on Earth
Read the user Guides
http://www.mede8er.com/mede8er_support_user_guides.htm