Mede8er Forum > Mede8er Products > MED500X2/MED400X2/MED400X2S/MED450X2 > Technical Issues > USB 3.0 Speed: very low speed with firmware 2.0.7
Pages: [1]   Go Down
« previous next »
Print
Author Topic: USB 3.0 Speed: very low speed with firmware 2.0.7  (Read 416 times)
sem2006
Experienced Member
**
Offline Offline

Posts: 126
« on: April 30, 2012, 10:57:48 pm »
Hi:

 I'm getting very low speeds with USB 3.0, since i updated to V2.0.7. The speeds are about 3,5MB/s when copying to the mede8er...  Shocked
Logged
sem2006
Experienced Member
**
Offline Offline

Posts: 126
« Reply #1 on: May 02, 2012, 12:21:52 pm »
No one else noted this behaviour?

Regards
Logged
jer1956
Global Moder8or
Hero Member
*****
Offline Offline

Posts: 9 142
« Reply #2 on: May 02, 2012, 12:29:17 pm »
Are you hot docking the X2 to the PC?  Those with actual USB 3.0. ports on the PC say it helps, so it might be mandatory with the new code.
Logged
sem2006
Experienced Member
**
Offline Offline

Posts: 126
« Reply #3 on: May 02, 2012, 04:22:32 pm »
What do you understand by hot docking? Do you mean, connect it to the pc only after having power it? If it's that, i can't really remember if i done it that way... Undecided
Logged
jer1956
Global Moder8or
Hero Member
*****
Offline Offline

Posts: 9 142
« Reply #4 on: May 02, 2012, 04:55:15 pm »
http://www.mede8erforum.com/index.php/topic,6563.0.html
Logged
sem2006
Experienced Member
**
Offline Offline

Posts: 126
« Reply #5 on: May 02, 2012, 10:42:44 pm »
Well..it might have worked..i say it might, because i installed a new disc and that may have influence. I'm now copying from the old disc to the new at an average of 57MB/s
Logged
Pages: [1]   Go Up
Print
« previous next »
Jump to: