Author Topic: X2 IR Hex codes  (Read 6377 times)

Offline Maasbommel

  • Global Moder8or
  • M8er Addict
  • *****
  • Posts: 11 503
  • Helpful Contribution Status: +50/-8
X2 IR Hex codes
« on: November 26, 2011, 04:09:52 pm »
For reference attached you can find the IR Hex codes of the X2 Line.

(With thanks to getsko for supplying these).
« Last Edit: August 31, 2015, 09:25:55 pm by Maasbommel »
Read the  Mede8er 400X/500X Beginners Guide
or Mede8er 500X2/400X2/450X2 Beginners Guide

Also check the Couto X3D Newbies Guide first.

Please don't PM me but post on the forum.

Offline mfhp

  • Newbie
  • Posts: 24
  • Helpful Contribution Status: +0/-0
Re: X2 IR Hex codes
« Reply #1 on: September 27, 2016, 04:08:24 pm »
For reference attached you can find the IR Hex codes of the X2 Line.

(With thanks to getsko for supplying these).

Thanks a lot for supplying these, work fine for me. One exception, though: there are two codes missing for buttons on the 500X2-Remote, please see attached image. I put a red rectangle around those two. When pressed during playback of e.g. a video file, Mede8er will do a time jump of several seconds forward or backward, respectively.
Could you please add these two codes?

Offline mfhp

  • Newbie
  • Posts: 24
  • Helpful Contribution Status: +0/-0
Re: X2 IR Hex codes
« Reply #2 on: October 01, 2016, 02:57:47 pm »
OK, found them. See attached complete code list, I named the two "Jump forward" and "Jump backward" and added them at the end.
I used a small piece of hardware named "USB IrToy", and IrScrutinizer to find the codes. Using the codelist I built a configuration file for RCoid, an android app working as a smart IR remote. IMHO a great piece of software if you own a smartphone with IR blaster.

Offline jer1956

  • Global Moder8or
  • M8er Addict
  • *****
  • Posts: 16 918
  • Helpful Contribution Status: +182/-35
Re: X2 IR Hex codes
« Reply #3 on: October 01, 2016, 04:35:08 pm »
Thank you for taking the time to find your own solution and posting it.