Mede8er Forum > Mede8er Products > MED500X2/MED400X2/MED400X2S/MED450X2 > Technical Issues > Resume function not working
Pages: [1]   Go Down
« previous next »
Print
Author Topic: Resume function not working  (Read 386 times)
Brenzef
Newbie

Offline Offline

Posts: 44
« on: November 02, 2011, 09:18:28 pm »
It seems the resume function is not working.
This is what I do...

Select a movie which is installed on the internal hard drive.
  • play it for some time.
    press the stop button
    and select the movie again and press play.
The movie starts then from the beginning.

I tried this with a movie ISO file, or playing from an unpacked VIDEO_TS source.
When I played the movie Avatar, looking in the movie source directory learns that there is a Avatar.ISO.t file assuming this is the file instructing the player that there is a resume.
I did not have this behavior with Firmware version 1.0.2,

Product & firmware version: Mede8er MED500X2 f/w v1.0.3
Audio: HDMI output > Philips Flatscreen
Audio setting: SPDIF Passthrough / Night mode OFF
Video: HDMI output > Philips Flatscreen
Video setting: 1080p 50Hz,24Hz ON,16:9
Media Source: Wired Network > Internal disk drive
Logged
Maasbommel
Global Moder8or
Hero Member
*****
Offline Offline

Posts: 8 406
« Reply #1 on: November 02, 2011, 09:20:05 pm »
Do you have this with only one movie ore all?
Did you set resume mode to on in setup?
Logged
Read the  Mede8er 400X/500X Beginners Guide
or Mede8er 500X2/400X2/450X2 Beginners Guide

Also check the Technical Support Guidelines first.

Please don't PM me but post on the forum.
Brenzef
Newbie

Offline Offline

Posts: 44
« Reply #2 on: November 02, 2011, 11:46:13 pm »
Yes, it is turned on.
Behavior is with all movies.
Logged
jer1956
Global Moder8or
Hero Member
*****
Offline Offline

Posts: 9 137
« Reply #3 on: November 02, 2011, 11:52:32 pm »
Play for some time! That requires a working timer function.
Logged
Brenzef
Newbie

Offline Offline

Posts: 44
« Reply #4 on: November 03, 2011, 04:25:23 pm »
Resume never works. Neither after playing a movie for 30 minutes or so.

It worked when it came out of the box with version 1.0.1 version installed.
Somehow not with 1.0.2 of 1.0.3 (tried after downgrading).

Weird...
Logged
Maasbommel
Global Moder8or
Hero Member
*****
Offline Offline

Posts: 8 406
« Reply #5 on: November 03, 2011, 08:12:48 pm »
Have you tried to do a reset factory defaults and set all settings manually again?
Did you try to install the firmware again by using fw recovery mode and not using config restore?
Logged
Read the  Mede8er 400X/500X Beginners Guide
or Mede8er 500X2/400X2/450X2 Beginners Guide

Also check the Technical Support Guidelines first.

Please don't PM me but post on the forum.
Brenzef
Newbie

Offline Offline

Posts: 44
« Reply #6 on: November 04, 2011, 11:01:22 pm »
Quote from: Maasbommel on November 03, 2011, 08:12:48 pm
Have you tried to do a reset factory defaults and set all settings manually again?
No, will try that tonight...

Quote from: Maasbommel on November 03, 2011, 08:12:48 pm
Did you try to install the firmware again by using fw recovery mode and not using config restore?
I think the default Firmware installation procedure is a Firmware recovery mode procedure, am I correct?
Only the last time, after I downgraded to 1.0.2 I performed a config restore. The other times I manually entered the config.
Logged
Brenzef
Newbie

Offline Offline

Posts: 44
« Reply #7 on: November 04, 2011, 11:16:56 pm »
Quote from: Maasbommel on November 03, 2011, 08:12:48 pm
Have you tried to do a reset factory defaults and set all settings manually again?
This solved the problem, great tip....
A bunch of flowers for you  Grin
Logged
Pages: [1]   Go Up
Print
« previous next »
Jump to: