schakine
Active Member
 Offline
Posts: 56
|
 |
« Reply #75 on: March 19, 2011, 03:40:13 pm » |
|
Same problem here...
I can use MEDE8 er fine but I cannot copy files from my PC to my mede8er because I cant enter it..
Same answer : network path have not been found..
So what do u say,folks!??
|
|
|
|
|
Logged
|
Specs:<br />Windows 7 64 bits<br />2,5 MHz Double core Processor<br />Connection by CPL (Power Plug) Ethernet<br />All DHCP<br />Router Orange ADSL Box<br />Samsung Plasma Screen
|
|
|
|
tachita_
|
|
« Reply #76 on: March 19, 2011, 04:10:56 pm » |
|
Same problem here...
I can use MEDE8 er fine but I cannot copy files from my PC to my mede8er because I cant enter it..
Same answer : network path have not been found..
So what do u say,folks!??
I think you restore configuration or just have different ip.... just check that. A different typed number give me headache for 3 hours |
|
|
|
|
Logged
|
|
|
|
|
jer1956
|
|
« Reply #77 on: March 19, 2011, 04:21:03 pm » |
|
Same problem here...
I can use MEDE8 er fine but I cannot copy files from my PC to my mede8er because I cant enter it..
Same answer : network path have not been found..
So what do u say,folks!??
So what advice given on the previous pages have you followed? I took all the information learnt from this thread and upgraded this Tip:- http://www.mede8erforum.com/index.php/topic,4014.0.htmlBut you shouldn't start there if you are a new Med buyer who has immedialtely upgraded the firmware. You must start with the Beginners Guide before anything else. |
|
|
|
« Last Edit: March 19, 2011, 04:27:05 pm by jer1956 »
|
Logged
|
|
|
|
karkal
Active Member
Offline
Posts: 62
|
|
« Reply #78 on: March 21, 2011, 10:49:42 pm » |
|
Hi
Problem is back.
Today when i tried to put file into meder i realized that meder is again not visible on my windows 7.
Restered NAS, restarted meder, restarted PC, restarted rooter. Nothing...
I tried 1 hour many tricks, nothing helped. I decied to reinstal firmware. Did it. Still same problem.
After that i did all long path like 2 weeks ago (including Acrylic). Problem still occurs.
Any new advice ? It worked perfect for 2 weeks. I didn't do any hardware configuration changes and software also. It worked yesterday at 9 pm. Today meder disapeared.
I can only ping it. That's all.
|
|
|
|
|
Logged
|
|
|
|
|
jer1956
|
|
« Reply #79 on: March 21, 2011, 11:37:44 pm » |
|
Hi
Problem is back.
Today when i tried to put file into meder i realized that meder is again not visible on my windows 7.
Restered NAS, restarted meder, restarted PC, restarted rooter. Nothing...
I tried 1 hour many tricks, nothing helped. I decied to reinstal firmware. Did it. Still same problem.
After that i did all long path like 2 weeks ago (including Acrylic). Problem still occurs.
Any new advice ? It worked perfect for 2 weeks. I didn't do any hardware configuration changes and software also. It worked yesterday at 9 pm. Today meder disapeared.
I can only ping it. That's all.
Did you also add the WINS fix? You should also consider using third party DNS servers to see if the problems is your ISP's DNS servers. http://code.google.com/speed/public-dns/docs/using.htmlhttp://theos.in/windows-xp/free-fast-public-dns-server-list/ |
|
|
|
« Last Edit: March 21, 2011, 11:47:23 pm by jer1956 »
|
Logged
|
|
|
|
karkal
Active Member
Offline
Posts: 62
|
|
« Reply #80 on: March 22, 2011, 08:54:22 am » |
|
Hi Im not sure what is WINS fix but, what i did: Steps 1,2,3,4,5 from link: http://www.mede8erforum.com/index.php/topic,4014.0.htmlI also tried google DNS ip on my PC ( 8.8.8.8 ). Nothing help. I also reinstalled today mornig FW to version 3.05 - same problem. I'm little tired about it, 2 weeks ago i spent all day to solve problem. It has been solve but i really dont know what exactly solve it. Today at work i will talk with administrator in my company, maybe he can help with it. One more thing. Starting from yesterday i can't even see meder in my network (previously i saw him but cant enter). Only 1 thing i can do it to ping it by IP and name. It works. |
|
|
|
« Last Edit: March 22, 2011, 09:30:47 am by karkal »
|
Logged
|
|
|
|
|
jer1956
|
|
« Reply #81 on: March 22, 2011, 11:25:57 am » |
|
Can you borrow another make of router, such as a Belkin, preforbly a modem/router?
|
|
|
|
|
Logged
|
|
|
|
Domino1999
B8a Tester
Senior Member
Offline
Posts: 420
|
|
« Reply #82 on: March 22, 2011, 11:53:04 am » |
|
One more thing. Starting from yesterday i can't even see meder in my network (previously i saw him but cant enter).
Only 1 thing i can do it to ping it by IP and name. It works.
I've never been able to see Mede8er from my Win7 PC after the Med has been switched on. It's been like this since early f/w versions such as 3.x.x. I always map a network drive on Win7 PC to Mede8er via Windows Explorer or My Computer and it then works fine. I believe Jer1956 has given many reasons in the past about why Mede8er is not always visible on network e.g. sometime takes Windows 15 minutes to discover all network devices. When you went back to 3.0.5 did you remember to set NAS to ON in the settings? |
|
|
|
|
Logged
|
Mede8er model: MED500X
Board: 1073DD
Bootloader: 0000.0202.1026
Firmware: V4.04 INC_HD Audio
Internal HDD: WD20EADS 3.5" Caviar Green 2TB SATAII 32MB
External USB HDD: Seagate FreeAgent 1TB
Network: Home Plugs (NETGEAR Powerline AV Adapter with Ethernet Switch XAVB1004 bridge)
Router: BT HomeHub V2
Display: Panasonic TX-L37G15B
Audio connection: HDMI to TV
Audio output devic
|
|
|
|
jer1956
|
|
« Reply #83 on: March 22, 2011, 12:02:53 pm » |
|
According to this "pinging" dosn't gurentee "connectiing":-
I can ping my host, but I can't view my server.
Being able to ping a host does not indicate connectivity. Many firewalls, routers and even some ISPs reject ICMP (ping) packets. Likewise, even if a host responds to a ping, that doesn't indicate that services are available at that location. Instead, you should attempt to reach services at your network using our Open Port tool or a Telnet command.
Another "source" for these issues is Winsock corruption. http://compnetworking.about.com/od/windowsnetworking/qt/winsockfix.htm |
|
|
|
« Last Edit: March 22, 2011, 12:08:59 pm by jer1956 »
|
Logged
|
|
|
|
karkal
Active Member
Offline
Posts: 62
|
|
« Reply #84 on: March 22, 2011, 12:47:23 pm » |
|
I've never been able to see Mede8er from my Win7 PC after the Med has been switched on. It's been like this since early f/w versions such as 3.x.x. I always map a network drive on Win7 PC to Mede8er via Windows Explorer or My Computer and it then works fine. I believe Jer1956 has given many reasons in the past about why Mede8er is not always visible on network e.g. sometime takes Windows 15 minutes to discover all network devices. When you went back to 3.0.5 did you remember to set NAS to ON in the settings?
Ok, i dont need to see meder in devices, but when i use \\192.168.1.200 or \\MEDE8ER i must be able to see meder folders. Of course i set NAS to on. I also logged via putty and restarted samba with a script. I also tested connection to some port. For example i tested port 139 and 445. Both are avaliable from my PC. Can some1 confirm port numbers that samba listen for connections ? |
|
|
|
« Last Edit: March 22, 2011, 12:54:43 pm by karkal »
|
Logged
|
|
|
|
karkal
Active Member
Offline
Posts: 62
|
|
« Reply #85 on: March 22, 2011, 12:52:20 pm » |
|
This problem is not describe as a win 7 problem. There is info about win xp, 2003 and vista. Im using win 7. |
|
|
|
|
Logged
|
|
|
|
|
jer1956
|
|
« Reply #86 on: March 22, 2011, 01:51:47 pm » |
|
This problem is not describe as a win 7 problem. There is info about win xp, 2003 and vista.
Im using win 7.
It's the principle. Windows 7 is new, but most problems aren't. So there is more advice out there which predates Win 7 than specifically for it. Many users fail to find solutions for themselves becuse they Google to specifically. Your not going to get many posts using "Windows 7 Mede8er winsock". http://windows7themes.net/repair-reset-winsock-windows-7.html |
|
|
|
« Last Edit: March 22, 2011, 02:22:10 pm by jer1956 »
|
Logged
|
|
|
|
karkal
Active Member
Offline
Posts: 62
|
|
« Reply #87 on: March 22, 2011, 03:40:41 pm » |
|
It's the principle. Windows 7 is new, but most problems aren't. So there is more advice out there which predates Win 7 than specifically for it. Many users fail to find solutions for themselves becuse they Google to specifically. Your not going to get many posts using "Windows 7 Mede8er winsock". http://windows7themes.net/repair-reset-winsock-windows-7.htmlI did things from your link step by step. I did it remotely and after winsock reset i had to restart windows. Now i can't connect to my pc remotely, i will check it after work at home and give u results. //Edit Im at home, i checked it. Nothing change. Still same problem. Only 1 thing i had to do after this tip was to set once again IP of my PC cause its gone. //Edit 2 I started testing with another PC (wife laptop). Im able to connect to meder from laptop (it's win XP). I also tried to connect to laptop from my PC and as i can see i can't either. So it looks like it is my PC (win 7) problem. I will try to find solution. If i have it i will let u know. |
|
|
|
« Last Edit: March 22, 2011, 05:50:34 pm by karkal »
|
Logged
|
|
|
|
|
jer1956
|
|
« Reply #88 on: March 22, 2011, 06:17:32 pm » |
|
|
|
|
|
|
Logged
|
|
|
|
karkal
Active Member
Offline
Posts: 62
|
|
« Reply #89 on: March 22, 2011, 08:58:51 pm » |
|
Read all, still nothing... I can scan both meder and laptop with win XP. I can scan open ports and many things, only 1 thing that i cant is to see shared folders (of course laptop got shared folders). It looks like on my win 7 this option has been blocked or something. |
|
|
|
|
Logged
|
|
|
|
|
