Pages: 1 2 3 [4]   Go Down
Print
Author Topic: [TIP] Easy Connect to your Win7 shares using guest account (Rev 2.0 or higher)  (Read 79342 times)
jer1956
Global Moder8or
M8er Addict
*****

Helpful Contribution Status: +31/-1
Offline Offline

Posts: 13 468


« Reply #45 on: January 19, 2012, 04:09:38 pm »

You say you used it with two W7 PC's. But did you configure either of them for workgroup sharing according to the Beginners Guide, and the first post in this Tip?

An X2 has a number of servers you can turn on or off. There is no single "x2" you  might find on the Network. SAmba workgroup (NAS) requires the most settings to be changed on a PC to  work.
Logged
Siddartha
Newbie


Helpful Contribution Status: +0/-0
Offline Offline

Posts: 10


« Reply #46 on: January 19, 2012, 04:14:48 pm »

You say you used it with two W7 PC's. But did you configure either of them for workgroup sharing according to the Beginners Guide, and the first post in this Tip?

An X2 has a number of servers you can turn on or off. There is no single "x2" you  might find on the Network. SAmba workgroup (NAS) requires the most settings to be changed on a PC to  work.

1 Laptop is my business laptop which is configured via a domain..
The other is a private network which is member of WORKGROUP and configured according to the settings as described in this thread..
Logged
bokkem
Newbie


Helpful Contribution Status: +0/-0
Offline Offline

Posts: 33


« Reply #47 on: October 15, 2013, 08:41:18 pm »

Elke keer als ik mijn OS herinstalleer of mijn netwerk wijzig loop ik tegen dit probleem aan en elke keer moet ik zoeken naar dit topic om het op te lossen, dus ik ga het nu maar eens toevoegen aan mijn favorites. Dit topic NOOIT verwijderen svp!  Grin
Logged
Pages: 1 2 3 [4]   Go Up
Print
Jump to: