Mede8er Forum > Mede8er Products > MED500X / MED400X > Technical Issues > Connecting Mede8er to Mac via SUB does not work anymore
Pages: [1]   Go Down
« previous next »
Print
Author Topic: Connecting Mede8er to Mac via SUB does not work anymore  (Read 619 times)
Andrej27
Newbie

Offline Offline

Posts: 2
« on: May 16, 2010, 09:59:14 am »
Today I tried to connect my mede8er to Mac via usb, but when i turned on the mede8er the blue light blinked, turned to red and then turned off. Where is the problem.
2 weeks ago all worked fine and now no  Sad 
Logged
Maasbommel
Global Moder8or
Hero Member
*****
Offline Offline

Posts: 8 418
« Reply #1 on: May 16, 2010, 10:22:28 am »
The cylcus you described about the led going from blue to red to off is normal when connecting to USB.
This means it goes into USB mode.

Did you wait long enough?

regards,
Maasbommel
Logged
Read the  Mede8er 400X/500X Beginners Guide
or Mede8er 500X2/400X2/450X2 Beginners Guide

Also check the Technical Support Guidelines first.

Please don't PM me but post on the forum.
Andrej27
Newbie

Offline Offline

Posts: 2
« Reply #2 on: May 16, 2010, 11:53:16 am »
After 1 hour of waiting, now it works!!!

Thanks
Logged
Maasbommel
Global Moder8or
Hero Member
*****
Offline Offline

Posts: 8 418
« Reply #3 on: May 16, 2010, 02:37:33 pm »
Huh That should not take that long... More something like 2 minutes max or so....
Logged
Read the  Mede8er 400X/500X Beginners Guide
or Mede8er 500X2/400X2/450X2 Beginners Guide

Also check the Technical Support Guidelines first.

Please don't PM me but post on the forum.
Pages: [1]   Go Up
Print
« previous next »
Jump to: