Author Topic: FIRMWARE UPDATE FAILED  (Read 734 times)

Offline brainis

  • Newbie
  • Posts: 1
  • Helpful Contribution Status: +0/-0
« on: April 24, 2017, 12:29:48 pm »
Good afternoon,

Just a short message because I tried to update the firmware of my MED800X with a USB KEY.

The system verified the firmware and asked me to confirm the launch of the process.

I did so and now the system doesn’t boot. My TV shows « no signal » …

I also tried to:

- update the firmware with the USB KEY by holding the on/off button for 20 seconds
- reset the configuration by removing the USB KEY and holding the on/off button for 20 seconds

The front led shall blink and I should see a progress bar but nothing happens…

Could you please help me?

Thank you!