Author Topic: Feedback for - V4.0.2 - 6April2016 - Beta -X3D Series - MED1000X3D/MED800X3  (Read 21479 times)

Offline newp

  • Newbie
  • Posts: 5
  • Helpful Contribution Status: +0/-0

Hello. Please it would be possible to adjust the IPTV application to give change soundtrack? Thank you.

Offline data68

  • Newbie
  • Posts: 18
  • Helpful Contribution Status: +1/-1
Installed this Version yesterday, not able to show any JPG files, only black screen! With 3.07 and 4.00 no problems with the same files.

Regards
 data

Offline TifKag

  • X2 Skin Designer
  • Experienced Member
  • ***
  • Posts: 104
  • Helpful Contribution Status: +4/-13
Installed this Version yesterday, not able to show any JPG files, only black screen! With 3.07 and 4.00 no problems with the same files.

Regards
 data

SEARCH before you ask something !!!!
http://www.mede8erforum.com/index.php/topic,17236.msg109771.html#msg109771

Offline lz2kc

  • Newbie
  • Posts: 3
  • Helpful Contribution Status: +0/-0
Please post your feedback here
Hello,
I don't see any user manual than "MED600X3D User Manual V3 Firmware". My question is how to add MAC address in WOL section in Setup>Misc>WOL (Wake on LAN). There is only MAC address of my router and I don't see any option to add the MAC address of my NAS server.
I have just upgraded my MED600X3D to FW ver. V4.0.2 - 6April2016 - Beta -X3D Series

Best regards,
Ilko Karaatanasov

Offline polakis

  • Newbie
  • Posts: 21
  • Helpful Contribution Status: +0/-0
When i scan a folder then my hard disk or usb dissappear from my med600. I must unplug the disk and put it back on again. Why is this happening?

Any answer on this?

Offline pallec

  • Experienced Member
  • **
  • Posts: 142
  • Helpful Contribution Status: +4/-0
    • Guitarfix
When will this turn into an official release (non-beta)?
MED600X3D - V4.0.2 - 6 April 2016
Connected to:
Netgear C6250 router
Synology DS214+ NAS (NFS)
Samsung UE65F8000 TV
Panasonic PT-AE2000 Projector
SONY STR-DN1040 AV Receiver

MED400X2S -> Philips TV (in bedroom)

www.guitarfix.dk

Offline jer1956

  • Global Moder8or
  • M8er Addict
  • *****
  • Posts: 17 225
  • Helpful Contribution Status: +193/-54
A small issue was found which should have had a quick fix. They haven't been able to fix it. I have suggested they release the current version "as is" because no one has reported it on the forum.

Offline x90125

  • Newbie
  • Posts: 1
  • Helpful Contribution Status: +0/-0
Hi all.

There hasn't been a firmware update for the MED1000X3D since last April...
Has development stopped completely for this model ?

Thanks.
M.T.

Offline Bytec

  • X3D Skin Designer
  • Experienced Member
  • ***
  • Posts: 242
  • Helpful Contribution Status: +7/-0
It really seems, that firmware development has been stopped.

It may bet time to upgrade to newer player. Any recommendations?

Player must have these characteristics:
- Low power (I'm not interested in media PC);
- Can play high bandwidth MKV files, such as BD remux files;
- Can play 3D videos, especially 3D MKV BD remux files;
- Support for H.265 and UHD (including HDR) is preferred.
MED1000X3D -> DENON AVR 1611B -> SAMSUNG Plasma TV PS64F8500

Offline jer1956

  • Global Moder8or
  • M8er Addict
  • *****
  • Posts: 17 225
  • Helpful Contribution Status: +193/-54
Hi all.

There hasn't been a firmware update for the MED1000X3D since last April...
Has development stopped completely for this model ?

Thanks.
M.T.
Has Massbommel has pointed out, it has had a lot of upgrades since it's inception. The world has moved on to Opensource source Kodi running via Opensource OS on ARM based players. Nothing can  be done to make the 1186 compete with those, and a lot of effort and money would be  wasted trying. 

Offline kev1n123

  • Newbie
  • Posts: 16
  • Helpful Contribution Status: +0/-0
Does anyone want to buy my MED600X3D ?
Nice player though (one careful owner).
Perhaps time to move on. Just bought a Vorke V1.
 :)
« Last Edit: October 10, 2016, 11:30:52 am by kev1n123 »

Offline K.B.Nikto

  • Experienced Member
  • **
  • Posts: 246
  • Helpful Contribution Status: +19/-1
Hi Kevin,

Please look for a PM from me.

Offline kaefert

  • Newbie
  • Posts: 12
  • Helpful Contribution Status: +0/-0
I just upgraded to  V4.0.2 - 6April2016, I was already on a previous 4.0.2 build, I am not sure which one.

On previous version I was able to use a USB-Keyboard to enter credentials for network shares, but in this firmware I can only use the arrow keys and enter keys of the keyboard to control the media player in the same way I can with the IR-Remote.

Offline ChrisW

  • Newbie
  • Posts: 1
  • Helpful Contribution Status: +0/-0
Is there really no further firmware for the med800x3d? I can`t believe....

Offline jer1956

  • Global Moder8or
  • M8er Addict
  • *****
  • Posts: 17 225
  • Helpful Contribution Status: +193/-54
Is there really no further firmware for the med800x3d? I can`t believe....

Sanji don't employ engineers. They subcontract the work to the Chinese. No Chinese company now has engineers working on 1186 work. Chip production stopped three years ago. Everyone moved on to ARM based chips, but Mede8er never found one they liked. So right now, at every other maker, the 1186 player is now considered beyond software upgrades. There is no one to do it in China. Mede8er are trying to keep what is considered a defunct chip going.

What we have is a Sales issue. Many wanted the Old School X3D before they vanished, so production was extended "as is". Those retailers who wanted them for those customers stacked them alongside the latest ARM chipped players at the beginning of their life cycle. They shouldn't have. Customers should have been told the difference.
« Last Edit: November 08, 2016, 09:50:15 am by jer1956 »