Author Topic: 1000 networking died  (Read 2260 times)

Offline Thrang

  • B8a Tester - 1000X3D
  • Experienced Member
  • ****
  • Posts: 144
  • Helpful Contribution Status: +0/-0
1000 networking died
« on: September 24, 2013, 12:54:19 AM »
No changes to my 1000, had been running 3.00 for a while - went to play something today, and while the network status lights are active, there is no networking functioning on the mede8er - wired or wireless, manual or DHCP. Cannot see local or internet resources. Tried har powering down, and did two 3.01 emergency installs to try and bring it back, but no change.

Changed network wire and ports on switch to known working entities, no change.

Any ideas, or how does this get swapped out...?

Offline Maasbommel

  • Global Moder8or
  • M8er Addict
  • *****
  • Posts: 11 503
  • Helpful Contribution Status: +51/-8
Re: 1000 networking died
« Reply #1 on: September 24, 2013, 03:12:52 AM »
Have you checked under netwerk info menu?
Does your unit get an IP?

Are you able to ping it from a pc?
Read the  Mede8er 400X/500X Beginners Guide
or Mede8er 500X2/400X2/450X2 Beginners Guide

Also check the Couto X3D Newbies Guide first.

Please don't PM me but post on the forum.

Offline momo2013

  • Newbie
  • Posts: 15
  • Helpful Contribution Status: +0/-0
Re: 1000 networking died
« Reply #2 on: September 24, 2013, 06:13:24 AM »
Sometimes the rooter need to be restarted or reseted to work fine.
Try this and it should work fine.

Offline Mede8er1

  • Administr8or
  • Hero Member
  • ******
  • Posts: 3 770
  • Helpful Contribution Status: +113/-28
Re: 1000 networking died
« Reply #3 on: September 24, 2013, 07:06:01 PM »
Issue resolved after Thrang did a Restore Default in Setup Menu

Mede8er1

Mede8er1
The Greatest Show on Earth
Read the user Guides
http://www.mede8er.com/mede8er_support_user_guides.htm