Author Topic: AGGREGATE JUKEBOX in with Firmware 15 MARCH V2.0.0  (Read 31735 times)

Offline feadin

  • Active Member
  • *
  • Posts: 72
  • Helpful Contribution Status: +0/-2
Re: AGGREGATE JUKEBOX in with Firmware 15 MARCH V2.0.0
« Reply #45 on: March 23, 2013, 01:31:03 PM »
Thanks, for now I'll just continue using the regular jukebox until there's a way to update the jukebox+ without having to erase it and create another one everytime I add content.

Offline jer1956

  • Global Moder8or
  • M8er Addict
  • *****
  • Posts: 17 318
  • Helpful Contribution Status: +203/-56
Re: AGGREGATE JUKEBOX in with Firmware 15 MARCH V2.0.0
« Reply #46 on: March 23, 2013, 04:55:00 PM »
Checkout Robinc's program.
http://www.mede8erforum.com/index.php/topic,10490.msg67291.html#msg67291


You don't have to create an aggregated jukebox using his program. I'm hoping that it can "maintain" jukebox+ with more options than  the internal code. The two  are not in completion...we won't be "adding" features found in his program to jukebox+.  We can't keep up with him! ;D

Offline SOCWRKR

  • Newbie
  • Posts: 47
  • Helpful Contribution Status: +0/-0
Re: AGGREGATE JUKEBOX in with Firmware 15 MARCH V2.0.0
« Reply #47 on: March 25, 2013, 04:25:16 PM »
OK so I got this to work to some degree.  I made a different older in my USB connected drobo and made this as the aggregate Jukebox.  When I did this it did recognize my movies on the drobo however it does not recognize them on my internal drive which is where I initially tried to have the aggregate jukebox that didn't work (see my previous posts). Any idea why it won't add any movies from the internal drive?  I have other jukeboxes from that Drive in my favorites that work fine?
mede8er 1000x3 v1.3 Sept. 29. HDMI 1.4
Onkyo NR3008
Audio setting passthrough
Samsung 63C8000
Media Source: Internal 2TB Seagate
Media Source: External WD My Book 3TB
Media Source: Seagate external 1TB

Offline jer1956

  • Global Moder8or
  • M8er Addict
  • *****
  • Posts: 17 318
  • Helpful Contribution Status: +203/-56
Re: AGGREGATE JUKEBOX in with Firmware 15 MARCH V2.0.0
« Reply #48 on: March 25, 2013, 04:30:53 PM »
The aggragegation code needs a Volume Name on the internal drive for the filelinks.  Disks formatted using pre-aggregation firmware won't have a volume name. You  need to  add one using slave mode.

Offline SOCWRKR

  • Newbie
  • Posts: 47
  • Helpful Contribution Status: +0/-0
Re: AGGREGATE JUKEBOX in with Firmware 15 MARCH V2.0.0
« Reply #49 on: March 25, 2013, 04:34:04 PM »
OK this is a bit beyond my knowledge base of computers. Any chance u could post exactly how to do that?  Ur help has been great btw.  Thanks
mede8er 1000x3 v1.3 Sept. 29. HDMI 1.4
Onkyo NR3008
Audio setting passthrough
Samsung 63C8000
Media Source: Internal 2TB Seagate
Media Source: External WD My Book 3TB
Media Source: Seagate external 1TB

Offline jer1956

  • Global Moder8or
  • M8er Addict
  • *****
  • Posts: 17 318
  • Helpful Contribution Status: +203/-56
Re: AGGREGATE JUKEBOX in with Firmware 15 MARCH V2.0.0
« Reply #50 on: March 25, 2013, 04:38:51 PM »
I presume you have tried slave mode? Disconnected the x3d from the TV etc, moved it to  a PC and connected using the blue lead to  a USB port on the PC?  When you do that  the internal drive should appear as one of the drives in Windows Explorer. Right click on the drive, select Properties, and therw should be a blank Volume Name on the General Tab. Give the drive a meaningful name.

Offline SOCWRKR

  • Newbie
  • Posts: 47
  • Helpful Contribution Status: +0/-0
Re: AGGREGATE JUKEBOX in with Firmware 15 MARCH V2.0.0
« Reply #51 on: March 25, 2013, 05:03:33 PM »
you rock ! thank you very much. I have done that before but did not know it was called slave mode. It sounds like it will be very easy a and I will do it when I get home thanks again for all of your help
mede8er 1000x3 v1.3 Sept. 29. HDMI 1.4
Onkyo NR3008
Audio setting passthrough
Samsung 63C8000
Media Source: Internal 2TB Seagate
Media Source: External WD My Book 3TB
Media Source: Seagate external 1TB