Mede8er Forum
Mede8er Products => MED600X3D / MED1000X3D / MED800X3D => Firmware Release Discussion => Topic started by: Mede8er1 on May 06, 2014, 07:37:05 AM
-
Please post your feedback here
Mede8er1
-
I Would like to report the bugs that I have found in this version:
1. The menu show the subtitles by language. (English, Spanish....) But Many times there are 2 subtitles with the same language but diferents names, like "English Forced" "English Full" "English Comentary" but the Menu only show the language: English English Spanish Spanish. And I dont know which is which. Its very confusing.
Would be great that the menu show the track name, and no only the language.
3. We Need An instant way to switch to precisely 4:3/4:3cinema/16:9 without guessing and fiddling with x and y axis.
The key of the remote control "TV" change video options like 720p, 1080p, 576... but not the aspect ratio. Would be possible add this option to change quickly from 4:3 cinema to 16/9.... Many videos and Tvs need change the aspect ratio to correct viewing in many TV.
Other users have asked the same option (thank you ghandar)
4. IPTV: flashstreaming is not working with iptv app. Would be possible give support? Its the most usual way to watch iptv in internet.
5. IPTV: Would be great add sopcast channels to iptv app. Example: sop://broker2.sopcast.com:3912/172998
I hope you can bear in mind this request.
Thank you!!
-
Format MicroDVD subtitles:Visible vertical line for separating the subtitle in the second row, which should not reside in the subtitles. Longer subtitles are not separated and are often displayed along the entire screen
(http://i61.tinypic.com/2ah851i.jpg)
-
Thanx for this version, it seem that the sound dropouts in Avatar 3D HD-Master, around the 17-18 minutes, are not longer be there when I played from the NAS, thanx for that. From USB it was Always good but from network not. Anyone else!!!
PierreO 8)
Testing today learns that the above mentioned problem still persists, shame on me.
-
I Would like to report the bugs that I have found in this version:
1. The menu show the subtitles by language. (English, Spanish....) But Many times there are 2 subtitles with the same language but diferents names, like "English Forced" "English Full" "English Comentary" but the Menu only show the language: English English Spanish Spanish. And I dont know which is which. Its very confusing.
Would be great that the menu show the track name, and no only the language.
3. We Need An instant way to switch to precisely 4:3/4:3cinema/16:9 without guessing and fiddling with x and y axis.
The key of the remote control "TV" change video options like 720p, 1080p, 576... but not the aspect ratio. Would be possible add this option to change quickly from 4:3 cinema to 16/9.... Many videos and Tvs need change the aspect ratio to correct viewing in many TV.
Other users have asked the same option (thank you ghandar)
4. IPTV: flashstreaming is not working with iptv app. Would be possible give support? Its the most usual way to watch iptv in internet.
5. IPTV: Would be great add sopcast channels to iptv app. Example: sop://broker2.sopcast.com:3912/172998
I hope you can bear in mind this request.
Thank you!!
About suggestion 4 and 5.
- Suggestion 4 is also put in a feature request filled by me. Please add your comment there. (http://www.mede8erforum.com/index.php/topic,13562.0.html)
- Suggestion 5 is also a good suggestion. This would, however, need support from the Sopcast developers to implement the Sopcast code into the Mede8er.
-
Improved thick border Subtitles - Its still mirror based and improvement is small but we are trying to stay away from the old way due to the bad Aliasing effect.
To me it always looks the same!!!
-
Format MicroDVD subtitles:Visible vertical line for separating the subtitle in the second row, which should not reside in the subtitles. Longer subtitles are not separated and are often displayed along the entire screen
(http://i61.tinypic.com/2ah851i.jpg)
This bug has been for some time...
See here : http://www.mede8erforum.com/index.php/topic,11382.0.html
*Fish*
-
Both MED600X3D and MED1000X3D crash when pressing the “Power Of/On” button on the Remote Control when the Media-Player is playing a Full HD video. Most of the times the Media-Player reboots immediately. Sometimes the Media-Player freezes. In that case a hard reboot is required.
Video Files are always selected through the Media Library. ( Jukebox function is not used)
The “Preview View” is always active.The location of the video file, USB, Internal Hard Disk or Network NAS, has no influence. In Firmware version 1.05 turning off the Media-Player during playback was not a problem.
Some Configuration Information:
TV-System : HDMI-Auto
1080P 23.976 : On
Auto Frame Rate : On
Resume Play : On
Samba Process : On
Auto View : On
Jukebox View : Off
Standard Subtitle : Internal
Connection to the network : LAN with Fixed IP-Adress
-
Will investigate
Mede8er1
-
Since updating, my MED600X3D to v3.0.6 i no longer get the safely remove usb command prompt when pressing f2 on the remote
-
In the new firmware the following point is said to be fixed.
1. Fixed - Green screen 3D Top & Bottom and PGS subs
Can you quantify what has been fixed with PGS subs. In my MKV rips of blu rays subtitles are in PGS format and the first line doesn't display, whereas all subsequent ones do. This is especially annoying for forced subs. Is this is what has been fixed?
Thanks
-
1. Reset caused by power off during movie playback: If power off is pressed during active or paused movie playback a reset is executed instead of shutting down
2. Language information not available after selection of certain track in movie playlist of a Full BD: If playback of a certain track is started from the playlist no language information is available for audio or subtitle selection. Due to this behaviour the right audio and/or subtitle track isn't selected automatically by the player.
See: http://www.mede8erforum.com/index.php/topic,14063.msg92205.html#msg92205
3. Wrong Media Library screen: 1. Movie jukebox is configured using 3 lines - 1/1 blue screen, 2. Start one movie of from this jukebox 3. Press Mede8er key on the remote to jump directly into the Media Library an you will see this with 1/1 blue screen -> The Mede8er remote key is not resetting jukebox full screen mode.
See: http://www.mede8erforum.com/index.php/topic,14063.msg92181.html#msg92181
4. Wrong framerate during Full BD playback with menu: I case a Full BD can be played with BD menu it can occur that the main movie or some bonus feature is played with the wrong framerate. The reason for this behaviour is that the Mede8er can't adapt the framerate for each title/track. Instead the Mede8er plays all titles/track with the same framerate. This framerate choosen by the device can be different to the framerate of the main movie so that it is also played with a wrong framerate. The result is a bad user explerience due to stuttering. Best would be to adapt the framerate at the beginning of each part which is played from Full BD. Please regard that trailer, bonus features, menu and main movie can have different framerates!
5. Gapless audio playback not possible for single file flac/ape with track information in cue file: Gapless audio playback is not possible if single file ape/flac is played with title/track information available in the cue file. A hickup sound is played at the end of each track/title and the beginning of the next track/title. So far gapless playback doesn't work.
-
In the new firmware the following point is said to be fixed.
1. Fixed - Green screen 3D Top & Bottom and PGS subs
Can you quantify what has been fixed with PGS subs. In my MKV rips of blu rays subtitles are in PGS format and the first line doesn't display, whereas all subsequent ones do. This is especially annoying for forced subs. Is this is what has been fixed?
Thanks
Annoyingly error, hope is finally fixed.
-
Hi
I can't search for subtitles online... Or it's only me??? I tried many movies and series
Thanks
-
Hi
I can't search for subtitles online... Or it's only me??? I tried many movies and series
Thanks
The opensub servers has become unreliable. Its not usually the code.
-
Using this version I get an "IO Error" message on the screen while watching content. What does this error message mean? Is it related to this new firmware. I never had this in the past.
Duppie
-
There's still a little bug with the focus.
Current:
01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 [16]
Now press the right arrow.
The result:
17 18 19 20 21 22 23 24
[25] 26 27
Should be:
[17] 18 19 20 21 22 23 24
25 26 27
Another problem with navigate back.
Last page with one row:
[17] 18 19 20 21
The result after pressing left arrow:
01 02 03 04 05 06 07 [08]
09 10 11 12 13 14 15 16
Should be:
01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 [16]
-
a really bad update! the device hangs and freezes several times a day,when browsing the jukebox.. I am not very happy with the purchase. >:(
-
a really bad update! the device hangs and freezes several times a day,when browsing the jukebox.. I am not very happy with the purchase. >:(
What version of the Media Player do you have? 600? 800 or 1000?
-
Big Bug.
When you use flash iptv channel the mede8er hangs,freezes, sometimes reset... And change many options in the configuration; time and hour, language preferences on the videos... a disaster..
And please.. we need to see the track name of the subtitles/audios no only the language.
thnks
-
Big Bug.
When you use flash iptv channel the mede8er hangs,freezes, sometimes reset... And change many options in the configuration; time and hour, language preferences on the videos... a disaster..
And please.. we need to see the track name of the subtitles/audios no only the language.
thnks
What model do you have? Also how did you upgrade your firmware?
-
What model do you have? Also how did you upgrade your firmware?
800. I upgrade the firmware, exactly as this website, the manual and instructions in the firmware post say.
-
Big Bug.
When you use flash iptv channel the mede8er hangs,freezes, sometimes reset... And change many options in the configuration; time and hour, language preferences on the videos... a disaster..
And please.. we need to see the track name of the subtitles/audios no only the language.
thnks
Flash iptv links do not work and have never worked. This is not a bug. There is no specification that the mede8er will support flash iptv links.
-
Flash iptv links do not work and have never worked. This is not a bug. There is no specification that the mede8er will support flash iptv links.
One thing is flash iptv not working and another very different to cause a complete destabilization of the system with a device misconfiguration. Think before you write buddy.
And when you say: "There is no specification that the mede8er will support flash iptv links." Pherhaps u are a weird communist consumer without ambition to improve... But We are trying to get a better device; no need scabs.
Another bug:
When you play a mkv with 2 tracks, 1.AC3 2. DTS, Mede8er always plays the dts even though the mkv file has been created with ac3 track as track preferred. When only are 2 ac3 tracks, choose fine the preferred track.
Im pretty sure that Mede8erforum is working to give the best solutions to us, the customers, and Im very satisfied to have this opportunity to convey questions and problems to a team that is always working to improve.
thnks!
p.s.: And please.. we still need to see the track name of the subtitles/audios no only the language.
-
One thing is flash iptv not working and another very different to cause a complete destabilization of the system with a device misconfiguration. Think before you write buddy.
And when you say: "There is no specification that the mede8er will support flash iptv links." Pherhaps u are a weird communist consumer without ambition to improve... But We are trying to get a better device; no need scabs.
IPTV is working. Flash IPTV links are not working.
I just mention it is NOT in the original specifcation of the device. Why would you create a bug report for a function what does not excist in the device? This is not a bug report but a feature request.
In the specs sheet IPTV is metioned like this:
V3 Firmware is equipped with the latest IP Streaming App functionality, IP streaming will allow you to stream content from the internet or share your video's and home video's via cloud services with family and friends who also own X3D's.
If you did some more exploring you would have find the original firmware specs when IPTV was introducted.
In the original release ( http://www.mede8erforum.com/index.php/topic,12019.msg78594.html august 22, 2013) Mede8er allready mentioned flash IPTV links are NOT supported.:
IPTV Functionality within the Mede8er does open some new opportunities and we are currently doing some real exciting streaming tests from Maasbommel's NAS in his study. I wont steal his thunder as I am sure he can explain this a lot better than me and some posts to follow.
You can edit or add your own channels easily by opening the .iptv file in notepad++ and just changing the Name and the Link.
We do not support flash type links and the links that work best are
1. http/ HLS type ie they end with .m3u8
2. http UDP type
3. rtmp
-
IPTV is working. Flash IPTV links are not working.
I just mention it is NOT in the original specifcation of the device. Why would you create a bug report for a function what does not excist in the device? This is not a bug report but a feature request.
I Repeat: One thing is flash iptv not working and another very different to cause a complete destabilization of the system with a device misconfiguration. READ and Think before you write buddy.
Anyway... I'm not here to talk out with you, unless you are the owner of the company as you think...
This part of the forum is to give information to be valued by the company, not you. Im going to talk to the fantastic med8er team, I have no desire to continue talking to you. Is absolutely useless. But say the last word buddy if make you feel better
bug:
When you play a mkv with 2 tracks, 1.AC3 2. DTS, Mede8er always plays the dts even though the mkv file has been created with ac3 track as track preferred. When only are 2 ac3 tracks, choose fine the preferred track.
thnks!!!
-
Zed85 is making the general point that bug exists only when the player dosnt work as designed. A bug dosnt exist just because you expect something different. In general media player chips are just bd player chips, and they avoid issues using front end blocking based on mime and codec profiles. There is no control once the media is sent to the codec chip.....if it chokes on the media the player crashes or hangs. Users have to learn what plays and what doesn't.
Also if the GUI has its own controls for selecting audio tracks its not a bug if its designed to ignore other ways of selecting audio tracks that a particuler user might prefer. All users are free to say they do prefer something different, but even if desirable it may not be possible due to realtek limitations in both hardware and software.
-
Using this version I get an "IO Error" message on the screen while watching content. What does this error message mean? Is it related to this new firmware. I never had this in the past.
Duppie
I noticed that. ..
the same error message give when you try delete some folders folder.jpg and fanart.jpg these are now locked or corrupted and can not be erased or replaced..
what a hell is going are!?
-
Zed85 is making the general point that bug exists only when the player dosnt work as designed. A bug dosnt exist just because you expect something different. In general media player chips are just bd player chips, and they avoid issues using front end blocking based on mime and codec profiles. There is no control once the media is sent to the codec chip.....if it chokes on the media the player crashes or hangs. Users have to learn what plays and what doesn't.
Also if the GUI has its own controls for selecting audio tracks its not a bug if its designed to ignore other ways of selecting audio tracks that a particuler user might prefer. All users are free to say they do prefer something different, but even if desirable it may not be possible due to realtek limitations in both hardware and software.
Well.. In many many bd players, multimedia players.... if you trying maybe to check it or maybe by mistake play a file and that player dont work with that file for many reasons, the player show a error message. Thats happen with all, ALL players, That its normal. The anomalous its that the player no only crash, but also lost all the configuration. If for you that its a normal behavior in a electronic equipment..., you should ask why does not happen with any other brand.
You say: "Also if the GUI has its own controls for selecting audio tracks its not a bug if its designed to ignore other ways of selecting audio tracks"
If you think that, maybe you should talk with the technical team to erase the option "Match audio with OSD" Because DONT WORK. And too talk with your partner "Mede8er1" who said about that "Match audio with OSD":
" If you set OSD Language to French (example) we try to default to the French audio track. Our engineers have implemented this new functionality"
That was in 2012, time enough to fix it, and if Didnt.. I do not need your permission to call it "Bug".
A bug dosnt exist just because you want that dosnt exist buddy.
Global Moder8or have to learn what says and what doesn´t.
-
Something isn't a bug just because you want the player to do something different. I don't need your permission to point that out.
I pointed out that the technology used prevents play errors by limiting what can played before they get to the point of play. A rip player can't control what is played, largely because the filters controlling it can be circumvented because some users want to see if anything can play, even if it crashes when it can't be played.
Tools keep getting added which allow more access to media that that might not conform to expected encoding. You get flexibility at the risk of unreliability....if the user trys unreliable sources.
If you want reliability try a disk p!ayer that can only play retail optical disk. Controlling media quality at the front end is the best way to avoid issues, even if it drastically reduces what you can play.
The person I responded to wanted mkv preferences to control what track is used. He never mentioned forcing anything by language. If that was your problem you should say so.
You where the one who used inflammatory language in objecting to zed85 trying to be helpful by explaining the issues. The success of the forum is based on people being willing to do that. It dosnt help to encourage that if those posting find some reason to take offence. Whose going to answer your posts if you don't want a response from mods or fellow members?
-
I seriously doubt you're reading what I've written. If something work in 3.0.5 version, and DONT WORK in 3.0.6.... Well, I thought you din't need to be aeronautical engineer to understand it.
Your nick here its "jer1956" (Global Moder8or) right?
I Would like to know if you talk in official representation of Sanji Electronic. Tomorrow I´ll call to the company to explaine your way to receive customer experience. Sanji sells the Med8er with a promise of interaction with the customers to improve the performance of his product and sure they like to know how its accomplished by their representatives.
After your answer about that, I Will not need anything more from you; I´ll talk directly with them.
p.s.: Don´t waste your time to change and soften your answers. I have the original saved for Sanji.
bye bye.
-
Great ! After updating to this firmware a few of my HDDs wil not be recognised anymore and if i try to go to the recognised HDDs the MED600X3D will just freeze and do nothing. Also there's no reaction if i try to turn off the device with the remote or the ON/OFF switch directly. I've tried to reinstall the FW three times again (USB sticks were still working) with the problems remaining and finally went back to 3.05 and everthing is now bck to normal.
Pherhaps u are a weird communist consumer without ambition to improve...
Communism is improvement if people are not blocking it. Capitalism ist a standstill we have now for thousands of years of slavery with only a few people have profit from it. Technical progress does not have anything to do with this...
-
I seriously doubt you're reading what I've written. If something work in 3.0.5 version, and DONT WORK in 3.0.6.... Well, I thought you din't need to be aeronautical engineer to understand it.
Your nick here its "jer1956" (Global Moder8or) right?
I Would like to know if you talk in official representation of Sanji Electronic. Tomorrow I´ll call to the company to explaine your way to receive customer experience. Sanji sells the Med8er with a promise of interaction with the customers to improve the performance of his product and sure they like to know how its accomplished by their representatives.
After your answer about that, I Will not need anything more from you; I´ll talk directly with them.
p.s.: Don´t waste your time to change and soften your answers. I have the original saved for Sanji.
bye bye.
The issue for me is not what you posted, but how you responded to zed85. You can't post on a forum, especially using bold to attract attention, and then attack anyone who chooses to post a disagreement. I posted to support a valued member of the community who has done much to achieve what you say you want, an improved player.
-
I agree to Jer1956. It is not in the orginal specs. It is not normal to expect a device to function other than is described.
Other than that I would like to say I would like to see that the Mede8er device will eventually support Flash IPTV links.
The Mede8er 600x3D has an RTD1186 chipset inside. I know other media players with that same chipset do support Flash.
For example the AVF ACCENTTURE AH069 and the EGreat R200S. These media player devices have the same RTD1186 chipset and have a browser what do supports HTML5 and FLV/Flash.
So I think it is an firmware/software related issue, not a hardware issue.
-
I seriously doubt you're reading what I've written. If something work in 3.0.5 version, and DONT WORK in 3.0.6.... Well, I thought you din't need to be aeronautical engineer to understand it.
Your nick here its "jer1956" (Global Moder8or) right?
I Would like to know if you talk in official representation of Sanji Electronic. Tomorrow I´ll call to the company to explaine your way to receive customer experience. Sanji sells the Med8er with a promise of interaction with the customers to improve the performance of his product and sure they like to know how its accomplished by their representatives.
After your answer about that, I Will not need anything more from you; I´ll talk directly with them.
p.s.: Don´t waste your time to change and soften your answers. I have the original saved for Sanji.
bye bye.
Do you think, he is afraid now ???
-
I seriously doubt you're reading what I've written. If something work in 3.0.5 version, and DONT WORK in 3.0.6.... Well, I thought you din't need to be aeronautical engineer to understand it.
Please try to keep things friendly and civil. I don't read this thread to hear people arguing. I read the thread to find out if the latest build is stable enough I want to try it, and if someone has already provided the feedback I'm considering leaving. Incidently, that is exactly the title of this thread "feedback". Feedback means just that. It could be bugs, it could be desired related updates, it could be opinions and feelings about the way the newest updates work. For every change, I'm sure there are people that think it is cool, and people that feel it is a step in the wrong direction. Certainly present your opinion, but there is no need to argue to the death to defend it. It is just that your opinion.
Now when I read through the noise of this argument, I see a few posts that indicate serious problems with freezes and such with this build, so I won't be trying it. But it would have been much easier to reach that conclusion if there wasn't all this extra noise.
-
Hi,
Some of my 1080p mp4 files played on X3D is out of sync. I have selected "Auto Lip Sync" in the setup as well. They play fine on my PC.
Duppie
-
Hi,
Some of my 1080p mp4 files played on X3D is out of sync. I have selected "Auto Lip Sync" in the setup as well. They play fine on my PC.
I believe this has been answered before, I think the answer was down to how the video files were ripped, what software etc. Hence they play fine on a PC but not on Mede8er due to lack of tolerances and missing information inside the file.
Sent from my HTC One using Tapatalk
-
Ok, Thanks for the reply adamforeman.
Will try and rip / convert them differently.
Any news on this:
http://www.mede8erforum.com/index.php/topic,12275.msg81321.html#msg81321
I have also reverted back to 3.0.5 due to the IO error message I get and it is fine now.
One strange thing I have noticed is that version 3.0.5 is the only version I have ever seen that loaded to 100% during the install phase. All the other versions usually go up to 70 to 75% and then immediately completes.
Just my observations.
Duppie
-
What about european or german keyboard support? Still can't write ÄÖÜ äöü ???
-
I have problem with movie infos... everything was ok until I installed a new skin - X2_Skin_for_X3_15Dec2013.
After that the movie infos are missing and pictures are random ones. I cant even change them anymore since they dont save.
Changing back to old skin also does not fix the problem.
-
I have problem with movie infos... everything was ok until I installed a new skin - X2_Skin_for_X3_15Dec2013.
After that the movie infos are missing and pictures are random ones. I cant even change them anymore since they dont save.
Changing back to old skin also does not fix the problem.
Which skin did you install?
With V3 firmware you can only install skins that explicit mention that they support the new V3 firmware.
To recover from this, reinstall the firmware with recovery mode.
-
As said before the skin was X2_Skin_for_X3_15Dec2013. I reinstalled the firmware and nothing changes. Pictures and descriptions are on wrong movies. Movies that are in sepparate folder are ok but not visually nice like before.
Also the player randomly hangs so reset is required. The soft is not OK. The hanging was almost right away after installing the 3.0.6 at the first time.
-
pentax
Sounds like you not using the Movie Jukebox and just browsing via the Media Library. Suggest you post a sample of the image that is not visually appealing.
Mede8er1
-
I enabled jukebox view and now it is impossible to edit movie folder as it hangs immediately. How can I do full system restore?
-
pentax
Only reason it would hang is if the source folder of your movies is not write enabled.
Mede8er1
-
It is write enabled and the player tries to download all the movie infos by itself and they are all wrong or incomplete. Again how to do a full system restore. It´s getting riddiculous.
-
It is write enabled and the player tries to download all the movie infos by itself and they are all wrong or incomplete. Again how to do a full system restore. It´s getting riddiculous.
Did you use recovery mode to reinstall the firmware?
So not the upgrade option in setup but as follow:
- put usb stick in usb port with the firmware install.img on it
- from standby (red led on) press the power on button and keep it pressed for 10-15 secs, then release
- firmware update will start, wait until it is finished
- after update do all setting in setup manually, do not use config restore option
-
Did you use recovery mode to reinstall the firmware?
So not the upgrade option in setup but as follow:
- put usb stick in usb port with the firmware install.img on it
- from standby (red led on) press the power on button and keep it pressed for 10-15 secs, then release
- firmware update will start, wait until it is finished
- after update do all setting in setup manually, do not use config restore option
This is exactly how I did it and no help.
-
Also the player randomly hangs so reset is required. The soft is not OK. The hanging was almost right away after installing the 3.0.6 at the first time.
connect the device to your computer usb and run disk error-checking that helps me.
-
connect the device to your computer usb and run disk error-checking that helps me.
Thank You, it actually worked.
-
Where is the about.jpg displayed? After Scrape, it looks very nice but after saving... it does not look quite like that. The small picture is gone and the text looks like on the main menu under film info...
-
Where is the about.jpg displayed? After Scrape, it looks very nice but after saving... it does not look quite like that. The small picture is gone and the text looks like on the main menu under film info...
When you have the focus on a cover, press the info button. (when not using jukebox mode)
When you are using jukebox mode, when focussed on a cover, press the enter button.
-
I Would like to report the bugs that I have found in this version:
1. The menu show the subtitles by language. (English, Spanish....) But Many times there are 2 subtitles with the same language but diferents names, like "English Forced" "English Full" "English Comentary" but the Menu only show the language: English English Spanish Spanish. And I dont know which is which. Its very confusing.
Would be great that the menu show the track name, and no only the language.
3. We Need An instant way to switch to precisely 4:3/4:3cinema/16:9 without guessing and fiddling with x and y axis.
The key of the remote control "TV" change video options like 720p, 1080p, 576... but not the aspect ratio. Would be possible add this option to change quickly from 4:3 cinema to 16/9.... Many videos and Tvs need change the aspect ratio to correct viewing in many TV.
Other users have asked the same option (thank you ghandar)
Thank you!!
I definitely hope these get addressed. #3 is something that should have been supported long ago - we need an instant way to switch back and forth between 4:3 and 16:9, not fiddling with X,Y coordinates. You don't get it perfect fiddling with X,Y coordinates. #1 can be very annoying not seeing the audio track name.
4. Wrong framerate during Full BD playback with menu: I case a Full BD can be played with BD menu it can occur that the main movie or some bonus feature is played with the wrong framerate. The reason for this behaviour is that the Mede8er can't adapt the framerate for each title/track. Instead the Mede8er plays all titles/track with the same framerate. This framerate choosen by the device can be different to the framerate of the main movie so that it is also played with a wrong framerate. The result is a bad user explerience due to stuttering. Best would be to adapt the framerate at the beginning of each part which is played from Full BD. Please regard that trailer, bonus features, menu and main movie can have different framerates!
5. Gapless audio playback not possible for single file flac/ape with track information in cue file: Gapless audio playback is not possible if single file ape/flac is played with title/track information available in the cue file. A hickup sound is played at the end of each track/title and the beginning of the next track/title. So far gapless playback doesn't work.
I've mentioned both of these also previously. Lack of Gapless playback is very annoying and really hurts the listening experience. This needs to be supported before I can consider this my primary media player for music, which I would like to do. I know the framerate issue has been discussed, but as you said, there should be a way for it to adapt in-between titles to switch to the correct framerate (maybe resetting the framerate in-between titles possibly?). I don't even play ISOs or BDMV folders anymore because of this huge drawback. There's got to be a way around it - like I said, maybe resetting the clock behind-the-scenes so-to-speak as the player switches to the next title. If the player can reset the clock when we exit out of a title and start a new one manually, then why can't it do the same thing in-between titles, as it is playing an ISO/BDMV folder, or a folder with multiple mkvs?
There's still a little bug with the focus.
Current:
01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 [16]
Now press the right arrow.
The result:
17 18 19 20 21 22 23 24
[25] 26 27
Should be:
[17] 18 19 20 21 22 23 24
25 26 27
Another problem with navigate back.
Last page with one row:
[17] 18 19 20 21
The result after pressing left arrow:
01 02 03 04 05 06 07 [08]
09 10 11 12 13 14 15 16
Should be:
01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 [16]
Good catch - a minor navigation issue but one that can get annoying.
-
Is there possible add the remote control power button feature? forced power-off for example, when you push a button continuously for 6 secons? would be a useful. ..so often the device is stuck & hangs ;)
-
The maximum setting for auto sleep function is 2hrs. Problem is if i stream from my 800x3d with harddrive to my 800x2 in my bed room, it seems like the 800x3d do not reset its sleep time counter. And even while streaming if i set timer to 2 hrs auto sleep. The 800x3d would automatically turn to stanby mode. Please have this corrected. Tnx.
-
two issues I had so far with this fw and one on every fw (player med600):
a) the resume froze the player and I had to force shut down
b) the player in the bedroom is directly connected to tv. The audio is downmix to stereo via HDMI.
All the media files are on a NAS.
I left the player open for some hours (around 3 hours), the NAS stayed open as well.
After 3 hours, when I tried to watch a mkv, the video was ok but there was no audio.
I have also another in leaving room with 3.0.5 fw, none of the above happened.
c) this issue is on every fw I have used and it has to do with jukebox
When changes pages, it skips a line
e.g. my jukebox is around 50 movies, in 3 rows view, I see all the movies, going to the last one on the right bottom corner and pressing the right arrow, the player will change a page, it will show the new 3 lines the next movies but the cursor instead of being in the first line, left top corner, it is on the second line most left movie.
-
Is there possible add the remote control power button feature? forced power-off for example, when you push a button continuously for 6 secons? would be a useful. ..so often the device is stuck & hangs ;)
You can do that with the power button on the unit itself. Keep it pressed when it is on and in a hung.
Be aware not to to this when it is in ref light standby mode as this will force recovery mode.
-
You can do that with the power button on the unit itself. Keep it pressed when it is on and in a hung.
Be aware not to to this when it is in ref light standby mode as this will force recovery mode.
I knew this, I ask just a forced power off functio in remote. at night stumbling to the machine it is tiresome.
-
I knew this, I ask just a forced power off functio in remote. at night stumbling to the machine it is tiresome.
How can you force via the remote if processing is locked up? There is usually a config issue behind regular lockups. You can even make them more likely if you don't try to solve them and just keep using th player and forcing it off. Your just adding drive corruption on top of the underlying cause.
-
No sound trough HDMI on Youtube after 3.0.6 firmware, trough SPDIF ok.
-
No sound trough HDMI on Youtube after 3.0.6 firmware, trough SPDIF ok.
Turn on Force Decode AAC/MP3 in Mede8er audio setup should do the trick.
-
hi all this is my first message...even if i read these forums every day ;D
just wanted to say to MEDE8ER team, that the firmware follow up is outstanding !
i just ordered the MED 600 from FRANCE and will be testing in very soon
-
Turn on Force Decode AAC/MP3 in Mede8er audio setup should do the trick.
Don't work.
-
Don't work.
This is a config issue as its working for us. Please post again in tech. This thread is not for resolving individuals issues.
-
Don't work.
My suggestion is to update the firmware using Safe mode and then change the settings back to how you set up your Mede8er rather than using the restore feature.
Sent from my HTC One using Tapatalk
-
This (might be) problem also occurs on previous release's.
Is there some kind of housekeeping occurring after midnight? Or day change over.
I ask because every time I setup a copy function (usb>hdd) to occur overnight. The file copy fails.
Delete the incomplete file, and restart no problems.
If I start during daytime (no day change over) "Same size of copy content". An error does not occur.
Strange problem unless housekeeping functions disrupt the copy process or Date change causes
a problem.
Thanks
-
This (might be) problem also occurs on previous release's.
Is there some kind of housekeeping occurring after midnight? Or day change over.
I ask because every time I setup a copy function (usb>hdd) to occur overnight. The file copy fails.
Delete the incomplete file, and restart no problems.
If I start during daytime (no day change over) "Same size of copy content". An error does not occur.
Strange problem unless housekeeping functions disrupt the copy process or Date change causes
a problem.
Thanks
Interesting. Someone else says the am/pm clock is wrong for the first hour. This means the players network time is 12hours out for 1 hoiur, and that can create network copy issues. It could also confuse the code which works out if the disks are being used.
-
Interesting. Someone else says the am/pm clock is wrong for the first hour. This means the players network time is 12hours out for 1 hoiur, and that can create network copy issues. It could also confuse the code which works out if the disks are being used.
That also may explain the flaky scraping of tv/movies. I get corrupted artwork of say 6%. Originally it was thought it was DNS which it may play a part, but perhaps we have something else to examine?
-
where is the subtitle option? before the update this option was working fine and now not any more!!!!!
-
where is the subtitle option? before the update this option was working fine and now not any more!!!!!
where the subtitle option is then to now? :)
my device subtitle downloader works just fine..
-
where is the subtitle option? before the update this option was working fine and now not any more!!!!!
Do you mean up / down? That is indeed an option....the cursor control can either be volume or subtitle. You select which in setup.
-
where is the subtitle option? before the update this option was working fine and now not any more!!!!!
Also, what version of the firmware were you on before you upgraded?
-
1. Reset caused by power off during movie or DLNA playback: If power off is pressed during active or paused movie playback a reset is executed instead of shutting down
This point creates a very bad user experience. HDMI-CEC is activated, a movie is playing. When I switch the TV off the mede8er get the shutdown through HDMI-CEC while TV and AVR are shutting down. But the Mede8er executes reset. While booting up it sends a power on command to the TV and AVR. Therefore they are powerd on again. Instead of powering of everything the Mede8er forces other device to power on again while the user might already left the room. Even I know this wrong behaviour I experience this problem again and again.
I think this bug was NOT present in some older FW releases...
... after spending some hours with checking different FW versions:
V3.0.4 - 17March 2014 X3D Series -> does not have the reset problem
V3.0.4 - 27March 2014 BETA X3D Series -> reset problem occurs
V3.0.5 - 4 April 2014 X3D Series -> reset problem occurs
...
The bug was introduced with firmware version V3.0.4 - 27March 2014 BETA X3D Serie. It also occurs if power off is executed during DLNA playback!
If you can't reproduce the problem because it might depend on device configuration I could provide you my exported settings .
I went back to 3.0.4 FW due to this bug.
-
Do you mean up / down? That is indeed an option....the cursor control can either be volume or subtitle. You select which in setup.
I was on 3.0.5 and now 3.0.6 and when i hit search, it doesnt do anything at all,
-
I was on 3.0.5 and now 3.0.6 and when i hit search, it doesnt do anything at all,
.
So you mean subtitle download isn't working? Even now we are left trying to deduce your problem.
-
.
So you mean subtitle download isn't working? Even now we are left trying to deduce your problem.
Yes subtitle download and search are not working after the update.... I see (sub searching) and whoop nothing...
-
A couple of GUI and functionality issues to report:
1. When viewing a movie jukebox (as 3 rows) and selecting the menu, the last menu option is hidden (i.e. one has to scroll down completely to reveal the menu option "mark as watched") . Therefore it is difficult oversee how to mark a movie as watched.
2. With large movie collections (i.e. more than 1000) the counter in the lower right corner of the of the jukebox view will display for example 1/1800 when selecting the first movie, however when selecting a movie towards the end of the list (say 1200 of 1800), the counter is cropped and one can only see "1200/1" instead of "1200/1800".
3. "With multiple video play" selected as on. If I understand it correctly, this allows for automatically playing of all videos in a folder in a loop fashion. However, when I watch 3 episodes in auto sequence (with other words I only select the first episode and the mede8er itself continues to play the episode thereafter and the following one) only the first episode is marked as watched. The remainder is not marked as watched. If I select each episode myself to play and play for longer than 10% of file length, the watched indicator is added.
4. TV-series scraping: most of my TV-series scrapped without issue. However the series "Will & Grace" even when using edit mode to search for the TV-series is not found. I even tried with just the text "will" and do not find the specific TV-series only other options. I subsequently went to the www.thetvdb.com website and did manage to find it online. (structure and file naming was correct in my case) and reverted on doing it manually. Any particular reason why this was not found by the internal scraper?
-
How going with improved subtitles readable ??!!!!
-
How going with improved subtitles readable ??!!!!
..change the font.
-
Just discovered a silly issue: 'Scan folders' always seems to skip the movie 'Extracted (2012)'.
The movie is in a folder by the same name. When I change the name of the folder (by removing 1 letter), the movie is found without any issues. So I guess there is some filter for the word 'extracted'. ;D
-
Just discovered a silly issue: 'Scan folders' always seems to skip the movie 'Extracted (2012)'.
The movie is in a folder by the same name. When I change the name of the folder (by removing 1 letter), the movie is found without any issues. So I guess there is some filter for the word 'extracted'. ;D
I've noticed the same in a few movies
simply rename "Extracted" without year.. tmdb database bug(?)
-
I've noticed the same in a few movies
simply rename "Extracted" without year.. tmdb database bug(?)
I believe it is not a TMDB bug, cause it worked fine by only changing the folder name, not the name of the movie file.
The scan probably ignores any folder that contains the word 'extracted', because a folder by that name is usually meant to extract files from rar and zip files.
-
I believe it is not a TMDB bug, cause it worked fine by only changing the folder name, not the name of the movie file.
The scan probably ignores any folder that contains the word 'extracted', because a folder by that name is usually meant to extract files from rar and zip files.
if you trying to search for Extracted (2012) in tmdb title not found. but without year movie found.
-
Some additional issues that I have noted:
1. When scraping TV Series, occasionally (about once in 20 pictures) cover art and episode art (image.xyz.jpg) will be downloaded and displayed as a triangle with an exclamation mark. The file size of the downloaded file will be 0 Kb. If I delete the (possibly corrupt?) file and rescan - all is resolved. There is no consistency when this will happen, but it is more prevalent when bandwidth is congested (i.e. when ADSL line is already having more than 50% overheads from other tasks)
2. The wrong sound codec information is displayed when toggling "info" during mkv video playback with a lossless audio track, e.g. DTS MA in file is stated on amp correctly with all 7.1 channels available, but file info displays it as Dolby digital. (Audio Surround Sound option set to TrueHD)
3. OSD overlay text display during video playback has a strange red shadow, for instance when toggling zoom during video playback, the magnifying glass icon will appear with text "zoom to height". This text is white with a red shadow and appears blurred or weird. Normal subtitles are for instance clear, so too are the GUI text when browsing. Other examples are "Unsupported file" overlay text. Colour setting in main settings menu set to "Auto" , the other colour space option set to off.
-
Hi
In this version does not work auto standby 30 minutes rest is working properly.
Regards
-
Since updating to 3.0.6 if I change the view to "show unwatched" when viewing my movies in jukebox view it is not remembered anymore when I exit that screen so I have to re-select it each time. Could the previous behaviour be restored or is there a setting I've missed that will achieve this?
-
Some additional issues that I have noted:
1. When scraping TV Series, occasionally (about once in 20 pictures) cover art and episode art (image.xyz.jpg) will be downloaded and displayed as a triangle with an exclamation mark. The file size of the downloaded file will be 0 Kb. If I delete the (possibly corrupt?) file and rescan - all is resolved. There is no consistency when this will happen, but it is more prevalent when bandwidth is congested (i.e. when ADSL line is already having more than 50% overheads from other tasks)
I'm notice the same
Sent from my GT-I9300 using Tapatalk
-
I'm notice the same
Sent from my GT-I9300 using Tapatalk
Scraping is very intolerant of slow DNS. When it gets no response for any reason, its treat as a no entry in the database and you get those icons so that you quickly see them and fix the search term using scrape edit. You can try using a different Dns server that's quicker.
-
Scraping is very intolerant of slow DNS. When it gets no response for any reason, its treat as a no entry in the database and you get those icons so that you quickly see them and fix the search term using scrape edit. You can try using a different Dns server that's quicker.
The only issue I've personally seen is that if you get a 0kb jpg, when viewing the movie title to edit it, it hangs the Mede8er completely and the only way to fix it is to reboot and delete the problematic files using my computer over the network, then rescan the movie. I haven't found a way other than that.
Sent from my HTC One using Tapatalk
-
is there any update or help for Subtitle issue!!!! i mentioned it before? i can't download subtitles....
-
is there any update or help for Subtitle issue!!!! i mentioned it before? i can't download subtitles....
Have you set the subtitles as external or internal?
Sent from my HTC One using Tapatalk
-
Since the 3.0.6 version my BT downloading is not stable. Are there more people with this issue?
-
Have you set the subtitles as external or internal?
Sent from my HTC One using Tapatalk
I tested both.... still nothing....
-
Problem with the sub is fixed, mede8er didn't received my DNS ip from the router...
-
I have noted that the relative video screen position is not correct after a zoom toggle. When playing a 16:9 aspect ratio mkv file and selecting zoom one can cycle between zoom to height, zoom to width, X:Y percentages and off. Before zoom toggle video is displayed correctly i.e. first pixel at position A1 (columns A and row 1) is filled. when toggling to x.y. one can adjust the percentage to whatever is desired and it is also possible to amend the aspect ratio. (great feature for those incorrect coded videos). However when toggling is switch to off, the complete video is shifted to the right (a few columns) and dropped a few lines (thus first pixel at approximately J10). This provides a weird black horizontal bar at the top and to the left side of the TV screen . Screen size is correctly adjusted in setting and display type chosen as 16:9 as the same aspect ratio of LG TV 55LA6210. One would expect that zoom off will revert to normal 16:9 playback on the 16:9 screen with no offset shift?
In order to resolve this I will have to re-toggle zoom and choose x:y at 100% and 100% level each. Alternatively I need to restart the video then it would display normally again (and remember not to touch the zoom button!).
-
My video settings won't stick with this firmware. I set my TV resolution to 1080p/50 but when I switch the mede8er off and on it reverts to 1080i/60. I am also getting the odd situation where the menus and jukebox are too dark, I think it is choosing the wrong colour space. The films still output correct when it does this though.
Didn't occur on the old firmwares. To go back to an older one do we follow the same procedure?
-
hi MARK ;D ;D ;D
Yes various people, ME INCLUDED stated that THIS IS a problem ! But is is random, sometimes happens, sometimes NOT
@Mede8er Mods:
What can we expect FROM next firmware ? you have not communicated on it....when can we expect a release ? ;) ;)
-
How it going with subtitle,shadow,background improvement ??!!!
-
please support Arabic subtitle which is right to left coding:
1- Sometimes it is cut the word and invert it
2- Questions mark ( symbols ) like (,),-,. also it is inverted.
the best code is Arabic windows ( cp 1256 )
-
How it going with subtitle,shadow,background improvement ??!!!
probably do not in any way!! (currently) ..there are a few quite effective "border" fonts (ttf)..
-
I have noted that the relative video screen position is not correct after a zoom toggle. When playing a 16:9 aspect ratio mkv file and selecting zoom one can cycle between zoom to height, zoom to width, X:Y percentages and off. Before zoom toggle video is displayed correctly i.e. first pixel at position A1 (columns A and row 1) is filled. when toggling to x.y. one can adjust the percentage to whatever is desired and it is also possible to amend the aspect ratio. (great feature for those incorrect coded videos). However when toggling is switch to off, the complete video is shifted to the right (a few columns) and dropped a few lines (thus first pixel at approximately J10). This provides a weird black horizontal bar at the top and to the left side of the TV screen . Screen size is correctly adjusted in setting and display type chosen as 16:9 as the same aspect ratio of LG TV 55LA6210. One would expect that zoom off will revert to normal 16:9 playback on the 16:9 screen with no offset shift?
In order to resolve this I will have to re-toggle zoom and choose x:y at 100% and 100% level each. Alternatively I need to restart the video then it would display normally again (and remember not to touch the zoom button!).
This is why we need a option to change the aspect ratio without manipulate the X:Y zoom option. Many TV need diferents aspects ratio, and if in the menu option there are that option, why don´t put it a little bit easy add it to "tv" remote button.
You have your issue , i have the mine, but the root its the same.
I hope the mede8er staff can bear in mind this problem.
Thank you..
-
hi Mede8er team wanna add something to a possible future update; dunno if i missed th option in 3.06 if it not really there
When i am on the WALL and i chose a movie, big detailed screens come up, fine; BUT why can't i push "LEFT" or "RIGHT" buttons on the remote to pass to the next movie ????
Why do i have to push "BACK" on the remote to go to the wall and rechose another movie and dive in the details ?!
I realised however that "UP" and "DOWN" work and movie changes according to the wall of course...so why not LEFT/RIGHT ?!!!
Do the devs know what i mean ? :P
-
I have noted that the relative video screen position is not correct after a zoom toggle. When playing a 16:9 aspect ratio mkv file and selecting zoom one can cycle between zoom to height, zoom to width, X:Y percentages and off. Before zoom toggle video is displayed correctly i.e. first pixel at position A1 (columns A and row 1) is filled. when toggling to x.y. one can adjust the percentage to whatever is desired and it is also possible to amend the aspect ratio. (great feature for those incorrect coded videos). However when toggling is switch to off, the complete video is shifted to the right (a few columns) and dropped a few lines (thus first pixel at approximately J10). This provides a weird black horizontal bar at the top and to the left side of the TV screen . Screen size is correctly adjusted in setting and display type chosen as 16:9 as the same aspect ratio of LG TV 55LA6210. One would expect that zoom off will revert to normal 16:9 playback on the 16:9 screen with no offset shift?
In order to resolve this I will have to re-toggle zoom and choose x:y at 100% and 100% level each. Alternatively I need to restart the video then it would display normally again (and remember not to touch the zoom button!).
If you want pixel mapping stick clear of screen size. If you have to use it it means over scan is operating in your TV. That is where you should correct it by turning it off.
-
Hi Jer1959, Thank for the recommendation. However, I am not sure I follow. ???
There is no option in the settings menu to switch screen size off? I also do not understand the issue of over scan or what you mean with it. To understand the issue more clearly for myself I did an experiment by swapping my MED 450x2 and MED600x3D out for the two viewing/entertainment areas that I have. I changed no setting on either device and the behaviour for both devices in their respective new environments were the same. With the MED450x2 zoom functionality is flawless (that is even true for the old 500X!) and the MED600x3D has the issue of black borders (only on top and left size when zoom is for instance toggled to off). Furthermore the overlay text has a hideous red shadowing making it difficult to read as reported in a previous post by me. I have also tried the new beta 3.0.7. for the MED600x3D firmware and the same happens.
See attached an image comparing the effect and issue that I have. Settings on both players during the test were: aspect ratio - 16:9, TV system - 1080p 50hz, auto frame rate - on, 23.976 hz - off; plasma - off; deep colour set to auto.
Another interesting aspect that came to light during the test is that the first 2-3 second of the test video (16:9 1080p episode of the Bates motel packaged as mkv) would not display (sound is already playing) on the MED600x3D whereas the MED450x2 immediately displayed it. I managed to note that if I switch auto frame rate off in the MED600x3D the issue is resolved. What is strange is that with the MED450x2 the auto frame rate is set to on and yet it does not have similar behaviour?
What does the xvYCC do? There is no instruction of the functionality in the V3 firmware online manual.
-
There are features which the 1186 SDK doesn't like applying one on top of the other. Screen size and zoom is one such combination. Its frustrating when older sdks don't have the issues of newer ones, but that's what you get with realtek.
The only solution possible is not use screen size. Its function is to compensate for over scan, even digital TVs use it. Overscan is small amount of zoom applied to hide noise and unused video space at image edges. So if you can't turn it off in the TV, the player applies a small amount of shrinkage. Its not good for purity applying these 2 processes.
Pixel mapping means no zoom, no overscan, get video pixels mapped to screen pixels be they unused or noise.
-
My dts HD movies are not playing well any more,
My equipment's are pioneer sc1223, Mede8er 800x and synology RS810,
Dts is playing fine but dts hd is stuttering sometimes no audio at all and video too,
Ps it did work before....
Thanks...
-
My dts HD movies are not playing well any more,
My equipment's are pioneer sc1223, Mede8er 800x and synology RS810,
Dts is playing fine but dts hd is stuttering sometimes no audio at all and video too,
Ps it did work before....
Thanks...
Did you preserve your config using a USB stick? If not you may have forgotten you had to tweak some settings to get it working the first time and those settings have been lost.
-
Did you preserve your config using a USB stick? If not you may have forgotten you had to tweak some settings to get it working the first time and those settings have been lost.
Maybe someone knows or give a hint...
Thanks
-
someting has happened between your nas or pc or network...clearly dts-hd streams for 99% of us with no issues...
-
No problems here with DTS HD MA and just watched an archive of an old DVD, not bluray, and its DTS EX core was fine.
I use Lenovo NAS and stream and use NFS.
-
No problems here with DTS HD MA and just watched an archive of an old DVD, not bluray, and its DTS EX core was fine.
I use Lenovo NAS and stream and use NFS.
Can u tell me your setting on Mede8er??? Audio settings
Thanks
-
For codec it is "Undecided". Thinking that is "Auto". It works like "Auto". So not set to any of the HD Audio options.
HDMI OUTPUT AUTO
SPDIF 2 CH Downmix
Force AAC ON
Surround AUTO
Lipsync AUTO
You issue sounds like dataflow issue though. Not streaming fast enough kind of thing.
I do NFS sharing from an NAS and the NFS is set to AUTO and then 32K. The suggestion to use UDP has some merit but really the performance between TCP and UPD over an in home network between TCP and UPD is negligible. AUTO should suffice. But the 32K thing, that just avoids some NFS sharing server, somewhere in the network, setting the packet size down to a small size by default. AUTO probably is good enough there too but setting it to 32K eliminates the chance of something doing so.
What are your streaming from?
-
For codec it is "Undecided". Thinking that is "Auto". It works like "Auto". So not set to any of the HD Audio options.
HDMI OUTPUT AUTO
SPDIF 2 CH Downmix
Force AAC ON
Surround AUTO
Lipsync AUTO
You issue sounds like dataflow issue though. Not streaming fast enough kind of thing.
I do NFS sharing from an NAS and the NFS is set to AUTO and then 32K. The suggestion to use UDP has some merit but really the performance between TCP and UPD over an in home network between TCP and UPD is negligible. AUTO should suffice. But the 32K thing, that just avoids some NFS sharing server, somewhere in the network, setting the packet size down to a small size by default. AUTO probably is good enough there too but setting it to 32K eliminates the chance of something doing so.
What are your streaming from?
Thanks jsmiddleton4, your settings worked for me.... I Totally forgot about NFS settings, once again thanks....
-
Did this get fixed in the latest beta version??
I am watching a movie and I stop it (beginning, middle , does not matter)
I leave the player on, so the player does it screen saver thing and whatever else.
I come back and look at other movies (I do not play them, just browse the titles).
then I go back to my movie and hit play, then the resume where left off menu appears.
Then I say yes to resume where I left off and FREEZE I have to unplug the meddler 600x3d .
This happens about 75% of the time for me I think I was on 4.02 (could have been 4.04) and all was good but now what gives!!
Happened at least 2 or 3 times last night, Cause I was playing with tv adjusting and flopping between movies.
Thank You!!
-
Did this get fixed in the latest beta version??
I am watching a movie and I stop it (beginning, middle , does not matter)
I leave the player on, so the player does it screen saver thing and whatever else.
I come back and look at other movies (I do not play them, just browse the titles).
then I go back to my movie and hit play, then the resume where left off menu appears.
Then I say yes to resume where I left off and FREEZE I have to unplug the meddler 600x3d .
This happens about 75% of the time for me I think I was on 4.02 (could have been 4.04) and all was good but now what gives!!
Happened at least 2 or 3 times last night, Cause I was playing with tv adjusting and flopping between movies.
Thank You!!
Same here and sometime when i press yes, it doesnt resume, it keeps playing the movie from the beginning
-
Tare.....
Glad I could be of service.
Jim
-
Hello,
last week I bought a 600X3D model (with builtin WLAN) equipped with firmware 3.0.3.
I had absolutely no problems with network settings (WLAN, PCI, Samba).
Yesterday, I downloaded and installed 3.0.6. First, I have to say that
I did not follow the procedure as described here but simple plugged in
a stick selected update installation from the menu.
After update installation the situation is:
- DHCP no more working; I need to manually set an IP address
- Youtube no more working; an error message about SSL
- Reaction to remote keys seems to be slower than before
So, what did I do wrong and what can I do about it?
Should I re-install 3.0.6 with a different update procedure?
Is it possible to downgrade to 3.0.3?
Thank you.
-
Update 3.0.6 again using emergency install. The issues are probably a bad flash using the internal method.
-
Update 3.0.6 again using emergency install. The issues are probably a bad flash using the internal method.
Hi,
I have been wanting to let you know your wording on the emergency procedure is not quite right, this is what you say
Emergency Procedure
Download the latest Mede8er Firmware from www.mede8erforum.com. UnZIP or UnRAR or join with HJ Split and will find one file named install.img. Copy this file to the root directory of a Flash Drive. Plug the flash drive into the Mede8er. Unplug the power to the X3D. Plug the power jack back in and hold the ON/OFF button on the Mede8er (not the remote) down for 15sec and then release. After the firmware has been checked (+-5-10sec) it will start to update. You will see the update progress on your TV. Do not remove power during the Firmware Update procedure .
According to that statement in bold, you plug power in while holding ( I know you don't specify "while"), but it seems that way, and that is wrong, it does not work that way, one needs to plug power in first, then immediately after, hold the on/off button for 15 seconds, this works for me all the time.
Thanks
-
So there is a missing "then". Many people imply that for themselves.
-
So there is a missing "then". Many people imply that for themselves.
I was just trying to be helpful, and let you all know that flaw in your wording.
Also I am sorry for being "NOT MOST PEOPLE", I don't know how many times in the past I upgraded your firmware and unlike MOST people, wasted lots of time trying to decrypt YOUR wording.
SORRY!!!!!!
Boy I wish I could find all smart decrypting people like you all do, I don't know how many hours I waste on writing well written instructuctions and then letting my coworkers try them and stand over the customers shoulder watching them read my instructions and perform them, and if I did something wrong, I corrected my instructions (I should have looked for the smart decrypting people like you have buy stuff) ;).
-
Update 3.0.6 again using emergency install. The issues are probably a bad flash using the internal method.
Thank you.
That seems to have solved my problems.
-
Is it just my problem, but I have 3.0.6 installed and suddenly the youtube app says it is not supported anymore...
-
Is it just my problem, but I have 3.0.6 installed and suddenly the youtube app says it is not supported anymore...
Already seen the 3.0.7 release notes?
http://www.mede8erforum.com/index.php/topic,15282.0.html
See also this topic with explanation:
http://www.mede8erforum.com/index.php/topic,15267.0.html