Mede8er Forum
Mede8er Products => MED500X / MED400X => General Discussion => Topic started by: unclex0r on February 08, 2010, 05:51:14 AM
-
Hi Guys,
Do any of you use a universal remote control and by any chance now what its 4 digit code is for the IR settings for the Mede8er. I could do a remote to remote programming, but that uses quite a bit of memory on the remote and don't have much space left
One for All ==> URC-8040
many thanks
unclex0r
-
Anyone able to assist with the IR code for universal remote "one of all - URC 7960. Help please
-
Are you sure your universal remote is RFcompatible ?
-
Hi guys,
It's been a while and I need some help.
Am looking for a good universal remote control that will work with mede8er and also the code. I just need something that will work nothing too fancy or expensive.
Thanks.
-
Hi guys,
It's been a while and I need some help.
Am looking for a good universal remote control that will work with mede8er and also the code. I just need something that will work nothing too fancy or expensive.
Thanks.
I'm using the logitecgph one. Does work real good.
Mike42.
-
I'm using the logitecgph one. Does work real good.
Mike42.
Thanks Mike, but most of the harmony one that's currently being sold here in Germany is the more expensive one+ and I can get a new mede8er for that price with a working remote.
I need a cheaper alternative that's confirm to work.
Cheers.
-
Thanks Mike, but most of the harmony one that's currently being sold here in Germany is the more expensive one+ and I can get a new mede8er for that price with a working remote.
I need a cheaper alternative that's confirm to work.
Cheers.
Do you have a tablet or smart phone.
There are app's avaible to control the mede8er via ip
Mike42
-
Hi Guys,
Do any of you use a universal remote control and by any chance now what its 4 digit code is for the IR settings for the Mede8er. I could do a remote to remote programming, but that uses quite a bit of memory on the remote and don't have much space left
One for All ==> URC-8040
many thanks
unclex0r
I'm also looking for this 4-digit code for my remote.
-
does anyone know if the remote for any of the 3D model of mede8er will work with the MED500X? Am thinking of upgrading. And it will be good to be able to operate the old player with the same remote.
Sent from my galaxy S4
-
does anyone know if the remote for any of the 3D model of mede8er will work with the MED500X? Am thinking of upgrading. And it will be good to be able to operate the old player with the same remote.
Sent from my galaxy S4
The mapping of the buttons is different from X and X3D.
So most buttons will work, but not all.
-
I'm also looking for this 4-digit code for my remote.
There are 2 type of remotes:
- ones that have hard coded tables in it, if the device you need is not in the code table of the manual, forget it. Will never work with that remote.
- ones that can learn infrared and can be programmed, e.g. like Logitech Harmony
-
There are 2 type of remotes:
- ones that have hard coded tables in it, if the device you need is not in the code table of the manual, forget it. Will never work with that remote.
- ones that can learn infrared and can be programmed, e.g. like Logitech Harmony
Thnx Maasbommel.
The remote of the receiver can do both so i'll have to do it manually.
The Harmony Remote is a great piece of kit but it has 1 minor drawback. It shuts down the Med if you decide to switch to regular tv.
I'm looking for a bit more flexibility to leave it on to work on it while watching tv and i think that the m/f remote of the receiver can just do the trick.
-
The Harmony Remote is a great piece of kit but it has 1 minor drawback. It shuts down the Med if you decide to switch to regular tv.
As far as I am aware you can also configure it to not shut a device off when switching to another activity.
-
As far as I am aware you can also configure it to not shut a device off when switching to another activity.
Didn't think of that, thnx for the tip. :)
-
i have the same problem...
just got the 7140 universal remote (one for all) but cant control my MED800X3D with it.
i found some codes but none of them worked.
the 7140 is programable though...