Pages: [1] 2 3   Go Down
Print
Author Topic: Issues with updating V4 beta4 from a Mede8er with 17L bootloader.  (Read 9623 times)
Maasbommel
Global Moder8or
M8er Addict
*****
Offline Offline

Posts: 10 677



« on: October 02, 2010, 05:09:32 pm »

This post made for those who are not able to update V4B4 on a unit with 17L bootloader.
Logged

Read the  Mede8er 400X/500X Beginners Guide
or Mede8er 500X2/400X2/450X2 Beginners Guide

Also check the Couto X3D Newbies Guide first.

Please don't PM me but post on the forum.
Maasbommel
Global Moder8or
M8er Addict
*****
Offline Offline

Posts: 10 677



« Reply #1 on: October 02, 2010, 05:12:38 pm »

Following persons have mentioned issues:

http://www.mede8erforum.com/index.php/topic,3166.msg21141.html#msg21141
http://www.mede8erforum.com/index.php/topic,3166.msg21144.html#msg21144
http://www.mede8erforum.com/index.php/topic,3166.msg21145.html#msg21145
http://www.mede8erforum.com/index.php/topic,3166.msg21117.html#msg21117
« Last Edit: October 02, 2010, 06:46:45 pm by Maasbommel » Logged

Read the  Mede8er 400X/500X Beginners Guide
or Mede8er 500X2/400X2/450X2 Beginners Guide

Also check the Couto X3D Newbies Guide first.

Please don't PM me but post on the forum.
Maasbommel
Global Moder8or
M8er Addict
*****
Offline Offline

Posts: 10 677



« Reply #2 on: October 02, 2010, 05:17:01 pm »

For those who have issues with updating a unit with 17L bootloader:

Suggestions:
- please remove all usb devices, only connect the usb stick with the fw on it (17L patch version), with the 2 files on the root of the stick.
- folllow the instructions that come with it.
- please tell which version you used (the rar or zip packed file), just to check if you used all the same version
- please tell if you have an internal disk in your mede8er
- please tell as much as possible about your setup, we must find why its not working for you and if it is related to some specific setup.
- please tell what step you took to update, step by step, and what you see on the screen. We need to be sure that those having these issues are using the proper update procedure.
Logged

Read the  Mede8er 400X/500X Beginners Guide
or Mede8er 500X2/400X2/450X2 Beginners Guide

Also check the Couto X3D Newbies Guide first.

Please don't PM me but post on the forum.
ThuNd3r
Guest
« Reply #3 on: October 02, 2010, 05:19:55 pm »

First i see a screen with "Installing Patch"
Then mede8er reboot and it installed the Beta4 Firmware.
Then the progress bar stops at 3/4 and the mede8er hangs up.

Internal Disk is a 2 TB Hitachi HDS72202 and formatted by mede8er setup.
I have a Samsung LE40B750 over HDMI and a Yamaha RX-V 661 over Coaxial connected.LAN is wired (D-Link DIR-655)
Logged
Maasbommel
Global Moder8or
M8er Addict
*****
Offline Offline

Posts: 10 677



« Reply #4 on: October 02, 2010, 05:23:18 pm »

First i see a screen with "Installing Patch"
Then mede8er reboot and it installed the Beta4 Firmware.
Then the progress bar stops at 3/4 and the mede8er hangs up.

Internal Disk is a 2 TB Hitachi HDS72202 and formatted by mede8er setup.
I have a Samsung LE40B750 over HDMI and a Yamaha RX-V 661 over Coaxial connected.LAN is wired (D-Link DIR-655)

I suggest the following to try:
- please remove all usb devices, only connect the usb stick with the fw on it (17L patch version), with the 2 files on the root of the stick
- maybe also disconnect the internal disk temporary, just to be sure that is not causing the hang during upgrade.

Reading your comments the L17 bootloader update fails. And because its fails, V4 cannot be loaded because it needs the 26 bootloader to run.
We need to find out why the 26 update is not working for you.
Logged

Read the  Mede8er 400X/500X Beginners Guide
or Mede8er 500X2/400X2/450X2 Beginners Guide

Also check the Couto X3D Newbies Guide first.

Please don't PM me but post on the forum.
Dyce
Newbie

Offline Offline

Posts: 4


« Reply #5 on: October 02, 2010, 05:27:30 pm »

500 Gig internal Samsung Sata HDD, formatted using Mede8er
Samsung LE40F71 through HDMI
5.1 amplifier connected over spdif
Network connected through Gigabit switch


Logged
Maasbommel
Global Moder8or
M8er Addict
*****
Offline Offline

Posts: 10 677



« Reply #6 on: October 02, 2010, 05:30:01 pm »

Guys,

please tell which version you used (the rar or zip packed file), just to check if you used all the same version.
please try my suggestions to minimize your mede8er as much as possible to be sure nothing in your setup is holding the update somehow.
please try another usb stick if you have one, to be sure its not cause by usb sitck
please try to disconnect your internal mede8er disk temporary, to see if thats not preventing the update
please remove spdiff or coax cable temprorary to see if that is not preventing the update somehow

regards,
Maasbommel
Logged

Read the  Mede8er 400X/500X Beginners Guide
or Mede8er 500X2/400X2/450X2 Beginners Guide

Also check the Couto X3D Newbies Guide first.

Please don't PM me but post on the forum.
Dyce
Newbie

Offline Offline

Posts: 4


« Reply #7 on: October 02, 2010, 05:34:46 pm »

Used the rar: 0017L_bootloader_patch.rar, 55.646 mb.

Just reformatting usb stick to see if that works.

I'll disconnect peripherals.
Logged
flysurfer28
Newbie

Offline Offline

Posts: 6


« Reply #8 on: October 02, 2010, 05:48:15 pm »

My Problems are gone!!!  Cheesy

I used the Program HPUSBFW to format my usb stick and now works all!!!

Thanks to Maasbommel  for the support!!!
Thanks to the Mede8ter Team for the GREAT Work!!!!
« Last Edit: October 02, 2010, 05:52:17 pm by flysurfer28 » Logged
Maasbommel
Global Moder8or
M8er Addict
*****
Offline Offline

Posts: 10 677



« Reply #9 on: October 02, 2010, 05:52:52 pm »

My Problems are gone!!!  Cheesy

I used the Program HPUSBFW to format my usb stick and now works all!!!


So your stick had a hidden partition.... That program from HP is just removing those.
Thanks for this feedback and also a thing for the others to try that tool. Just google for it.
Logged

Read the  Mede8er 400X/500X Beginners Guide
or Mede8er 500X2/400X2/450X2 Beginners Guide

Also check the Couto X3D Newbies Guide first.

Please don't PM me but post on the forum.
flysurfer28
Newbie

Offline Offline

Posts: 6


« Reply #10 on: October 02, 2010, 05:54:58 pm »

Here is the Link for the Tool...

http://www.chip.de/downloads/HP-USB-Disk-Storage-Format-Tool_23418669.html
Logged
ThuNd3r
Guest
« Reply #11 on: October 02, 2010, 06:40:10 pm »

I have tried another USB Stick and it works fine Smiley

Thanks for the very good support. Its Awesome!!!!

The new Interface is very very nice. Good Job Smiley
Logged
Maasbommel
Global Moder8or
M8er Addict
*****
Offline Offline

Posts: 10 677



« Reply #12 on: October 02, 2010, 06:45:51 pm »

I have tried another USB Stick and it works fine Smiley

Thanks for the very good support. Its Awesome!!!!

The new Interface is very very nice. Good Job Smiley

Great! That makes 2 that are solved now. Still waiting for those other guys to report back.
Logged

Read the  Mede8er 400X/500X Beginners Guide
or Mede8er 500X2/400X2/450X2 Beginners Guide

Also check the Couto X3D Newbies Guide first.

Please don't PM me but post on the forum.
Danmarc
Newbie

Offline Offline

Posts: 7


« Reply #13 on: October 02, 2010, 07:28:42 pm »

Same problem here:

1. Patch installed but no reboot.
2. Tried again, started to install beta 2 and blocked at 3/4.
3. Tried with another stick, blocks and appears message: Install error, please reboot. Set kernel image size failed.
4. Tried to go back to version 3.0.4: same above message with the "kernel".
5. Now is dead, just the logo.
Logged
Maasbommel
Global Moder8or
M8er Addict
*****
Offline Offline

Posts: 10 677



« Reply #14 on: October 02, 2010, 07:30:04 pm »

Same problem here:

1. Patch installed but no reboot.
2. Tried again, started to install beta 2 and blocked at 3/4.
3. Tried with another stick, blocks and appears message: Install error, please reboot. Set kernel image size failed.
4. Tried to go back to version 3.0.4: same above message with the "kernel".
5. Now is dead, just the logo.


Try to reformat you usb stick with the tool mentioned above.....
Logged

Read the  Mede8er 400X/500X Beginners Guide
or Mede8er 500X2/400X2/450X2 Beginners Guide

Also check the Couto X3D Newbies Guide first.

Please don't PM me but post on the forum.
Pages: [1] 2 3   Go Up
Print
Jump to: