I have a med 500:
When I play a 1080x720 xvid file in an avi container it plays without problem. If I change the container from avi to mkv by just remuxing the avi file with mkvmerge the video is not played back with the error message : frame too big.
Any explanation for this behaviour?
This is the info of the avi file:
Play duration: 02:12:58 (7977.52 s)
Container type: AVI OpenDML indexes multi-chunks (*)
Number of streams: 2
Type of stream nr. 0: video
Type of stream nr. 1: audio
Audio streams: 1
ISFT: VirtualDubMod 1.5.10.2 (build 2540/release)
JUNK: VirtualDubMod build 2540/release
[ Relevant data ]
Resolution: 1280 x 720
Width: multiple of 32
Height: multiple of 16
[ Video track ]
FourCC: XVID/XVID
Resolution: 1280 x 720
Frame aspect ratio: 16:9 = 1.777777
Pixel aspect ratio: 1:1 = 1
Display aspect ratio: 16:9 = 1.777777
Framerate: 25 fps
Number of frames: 199438 (134231)
Stream size: 3,098,416,792 bytes
Bitrate: 3107.147877 kbps
Qf: 0.134858
Key frames: 1766 (0; 190; 285; 530; 695; ... 199390)
Null frames: 0
Min key int: 1
Max key int: 302
Avg key int: 112.932049
Delay: 0 ms
[ Audio track ]
Audio tag: 0x2000 (AC3)
Bitrate (container): 192 kbps CBR
Channels (container): 2
Sample rate (container): 48000 Hz
Chunks: 199348
Stream size: 191,385,600 bytes
Preload: 512 ms
Max A/V diff: 536 ms
Chunk-aligned: Yes
Mode: dolby
Delay: 0 ms
[ About MPEG4 encoding ]
User data: XviD0064
QPel: No
GMC: No
Interlaced: No
Aspect ratio: Square pixels
Quant type: H.263
[ Profile compliancy ]
Profile to check: MTK PAL 6000
Resolution: 1280 x 720 > 720 x 576
Framerate: Ok
Warning: If you need a more complete report, then click on "DRF analysis"
This report was created by AVInaptic (18-11-2007) on 16 nov 2011, h 23:00:24
and this of the mkv file:
[ Generic infos ]
Play duration: 02:12:58 (7977.52 s)
Container type: matroska
Creation time: 16/11/2011 21:37:33 UTC
Number of streams: 2
Type of stream nr. 1: video (V_MS/VFW/FOURCC)
Type of stream nr. 2: audio (A_AC3)
Audio streams: 1
Muxing Application: libebml v1.2.2 + libmatroska v1.3.0
Writing Application: mkvmerge v5.0.1 ('Es ist Sommer') built on Oct 9 2011 11:55:43
[ Relevant data ]
Resolution: 1280 x 720
Width: multiple of 32
Height: multiple of 16
[ Video track ]
Codec ID: V_MS/VFW/FOURCC
Resolution: 1280 x 720
Frame aspect ratio: 16:9 = 1.777777
Pixel aspect ratio: 1:1 = 1
Display aspect ratio: 16:9 = 1.777777
Framerate: 25 fps
[ Audio track ]
Codec ID: A_AC3
Channels (container): 2
Sample rate: 48000 Hz
Mode: dolby
[ About MPEG4 encoding ]
User data: XviD0064
QPel: No
GMC: No
Interlaced: No
Aspect ratio: Square pixels
Quant type: H.263
[ Profile compliancy ]
Profile to check: MTK PAL 6000
Resolution: 1280 x 720 > 720 x 576
Framerate: Ok
Warning: If you need a more complete report, then click on "DRF analysis"
This report was created by AVInaptic (18-11-2007) on 16 nov 2011, h 23:02:03
If I change the codec ID in the mkv file from :V_MS/VFW/FOURCC to XVID/XVID as in the avi, sound is played but no video is shown.
Anxious to get an explanation

Lupissimo