Pages: [1]   Go Down
Print
Author Topic: Video Wall On 400X  (Read 297 times)
rockdg
Newbie

Offline Offline

Posts: 24


« on: November 14, 2011, 03:07:32 pm »

Hi
I purchased the  mede8er 400x model expecting a video wall to be available. It does not seem to be available via the remote control. Can this model handle a Video Wall and what level of Firmware should i be running it on to get this service

Thanks
Logged
Theike
Full Member
**
Offline Offline

Posts: 154


« Reply #1 on: November 14, 2011, 03:23:31 pm »

Yes it can read the manual
Logged
jer1956
Global Moder8or
Hero Member
*****
Offline Offline

Posts: 5 936


« Reply #2 on: November 14, 2011, 03:31:39 pm »

Please confirm it is the 400x you are talking about, becuase if it is, then this post needs moving.
Logged
Maasbommel
Global Moder8or
Hero Member
*****
Offline Offline

Posts: 6 874



« Reply #3 on: November 14, 2011, 06:08:52 pm »

So the question is: do you have a 400X2 or a 400X?
Logged

rockdg
Newbie

Offline Offline

Posts: 24


« Reply #4 on: November 15, 2011, 12:17:05 pm »

Hi

The model descriped on the box says MED400X Mini and if a manual had been provided i would have read it. There was no manual in the suppled box

Thanks
Logged
Maasbommel
Global Moder8or
Hero Member
*****
Offline Offline

Posts: 6 874



« Reply #5 on: November 15, 2011, 11:20:27 pm »

There should have been a manual in the box....

You can find the user manuals here:
http://www.mede8erforum.com/index.php/topic,4796.0.html
Logged

jer1956
Global Moder8or
Hero Member
*****
Offline Offline

Posts: 5 936


« Reply #6 on: November 15, 2011, 11:36:32 pm »

Remember Majnu's problem. They just put a folded install guide in the box now. You have to download the Users Guide.
Logged
Pages: [1]   Go Up
Print
Jump to: