Mede8er Forum > Mede8er Products > MED500X / MED400X > Technical Issues > adjust movie sound via remote control
Pages: [1]   Go Down
« previous next »
Print
Author Topic: adjust movie sound via remote control  (Read 395 times)
erikie
Newbie

Offline Offline

Posts: 4
« on: September 07, 2010, 11:21:58 am »
Hi,

i have an issue, i cannot adjust the movie sound via the remote control.

When i play music it works without a problem, but when i play a movie it won't..

Is there anyboby with a solution?

Thx,

Erik
Logged
Domino1999
B8a Tester
Sr. Member
***
Offline Offline

Posts: 420
« Reply #1 on: September 07, 2010, 12:30:08 pm »
So, just to confirm. You're playing a movie on the Mede8er and during playback you're pressing the up/down arrows on the remote and the volume isn't changing, correct?
Logged
Mede8er model: MED500X
Board: 1073DD
Bootloader: 0000.0202.1026
Firmware: V4.04 INC_HD Audio
Internal HDD: WD20EADS 3.5" Caviar Green 2TB SATAII 32MB
External USB HDD: Seagate FreeAgent 1TB
Network: Home Plugs (NETGEAR Powerline AV Adapter with Ethernet Switch XAVB1004 bridge)
Router: BT HomeHub V2
Display: Panasonic TX-L37G15B
Audio connection: HDMI to TV
Audio output devic
mover
B8a Tester
Jr. Member
***
Offline Offline

Posts: 78
« Reply #2 on: September 07, 2010, 02:02:24 pm »
If you're playing DVD files, you can't adjust the volume using the Up and Down arrow keys. You'll have to use the "Vol +" and "Vol -" keys instead.
Logged
erikie
Newbie

Offline Offline

Posts: 4
« Reply #3 on: September 07, 2010, 08:15:06 pm »
Both ways you suggest do not work.....
« Last Edit: September 08, 2010, 09:29:40 am by erikie » Logged
Maasbommel
Global Moder8or
Hero Member
*****
Offline Offline

Posts: 6 424
« Reply #4 on: September 07, 2010, 08:17:31 pm »
How is your audio setup?
To an amp? By digital coax or optical cable? Then that is probably the reason.
Logged
Please check the Mede8er 400X/500X Beginners Guide
or Mede8er 500X2/400X2/450X2 Beginners Guide

Also check the Technical Support Guidelines first.
erikie
Newbie

Offline Offline

Posts: 4
« Reply #5 on: September 08, 2010, 09:33:41 am »
Audio is via optical to an amp, but for the audio files i play i can use the remote to change the volume level without any problems.

For video when i turn the level to zero the sound is off, when i go up the soundlevel is one level, so it is either on or off....

All audio goes via the same optical wire.

 Huh
« Last Edit: September 09, 2010, 10:15:57 am by erikie » Logged
erikie
Newbie

Offline Offline

Posts: 4
« Reply #6 on: September 13, 2010, 10:19:45 am »
Anybody any idea??
Logged
Pages: [1]   Go Up
Print
« previous next »
Jump to: