Author Topic: MED1000x3d stuck on Mede8er logo on startup  (Read 2789 times)

Offline alonav

  • Newbie
  • Posts: 8
  • Helpful Contribution Status: +0/-0
MED1000x3d stuck on Mede8er logo on startup
« on: October 11, 2019, 02:01:11 PM »
Hi,

I have the Med1000x3d for more then 5 years and i am more then happy to use the producet,

But now it is stuck on startup with the Mede8er logo on both analog and HDMI.

Any suggestions?

Offline arrri

  • Newbie
  • Posts: 5
  • Helpful Contribution Status: +0/-0
Re: MED1000x3d stuck on Mede8er logo on startup
« Reply #1 on: January 11, 2020, 10:23:51 AM »
I have the same problem! Any ideas?

Offline jer1956

  • Global Moder8or
  • M8er Addict
  • *****
  • Posts: 17 393
  • Helpful Contribution Status: +203/-55
Re: MED1000x3d stuck on Mede8er logo on startup
« Reply #2 on: January 11, 2020, 10:43:44 AM »
Sounds like an EDID transfer hang caused by flash corruption.
That can be cleared by reinstalling the firmware via Emergency Mode. The player will trigger Emergency Mode before the EDID transfer thats hanging the player.