MED250X Firmware Update V1.7 -- 15 May 2014 (Latest)

[Mede8er1]

New update for MED250X

Changelog V1.7 - 15May2014
1) Fix: device manager: get fail warning when renaming files more than 5 times in one session on NTFS drive.

If you do not have a unrar program you can download Free program Rarzilla
Download RarZilla Free Unrar

MED250X INTERNATIONAL VERSION
http://www.mede8er.org/Firmware_Final/MED250X/MED250X_V1.7_15May2014.zip

MED250X THAI VERSION
http://www.mede8er.org/Firmware_Final/MED250X/MED250X_V1.7_15May2014_Thai.zip

MED250X CHINESE VERSION
http://www.mede8er.org/Firmware_Final/MED250X/MED250X_V1.7_15May2014_Chinese.zip

UNKNOWN HARDWARE ERROR
If you get a 'UNKNOWN HARDWARE ERROR MESSAGE' then use this firmware
MED250X INTERNATIONAL VERSION V1.65S
http://www.mede8er.org/Firmware_Final/MED250X/MED250X_V1.6S_Europe.zip

Update Procedure
Use a USB Stick that is formatted fat32 in Windows PC. If you have any difficulty we suggest you format the USB stick with the HP Utility - https://docs.google.com/a/mede8er.com/file/d/0B_SDrpPD4AxPaEF0NUVRcU5WSmc/edit
UnZIP or UnRAR the file and you will find one file named install.img. Copy this file to the root directory of a Flash Drive. Plug the flash drive into the Mede8er. Disconnect the power jack at the rear of the Mede8er then plug it back in - Now press the on/off button on the Mede8er (not the remote) and hold it pressed for 10 seconds and then release.

After approximately 15 seconds the LED on the Mede8er with flash red-blue and you will get a display of the progress of percentage installed on your TV display (some TV's will not display this) wait until the Mede8er re boots itself +- 180 sec. You Mede8er is now be updated.

DO NOT REMOVE POWER DURING THE EMERGENCY RECOVERY PROCEDURE.

Mede8er1