Author Topic: [TUTORIALS] NFS server For Windows - HaneWIN -  (Read 25546 times)

Offline wool

  • Newbie
  • Posts: 2
  • Helpful Contribution Status: +0/-0
[TUTORIALS] NFS server For Windows - HaneWIN -
« on: June 03, 2013, 07:30:40 PM »
Share Media from a Windows PC with  NFS server For Windows - HaneWIN





 all IP are automatically assigned by my router( Freebox Revolution )

IP du PC = 192.168.0.25


NFS server For Windows - HaneWIN


NFS Server (The app is not free, however there is a 30 days trial period to test)

Download
http://www.hanewin.net/nfs-e.htm

Once installed, it will select NFS Server


Made OK to be careful



Then go to the Export tab, then click Edit Export Files and delete the example found in the Edit Exports

6 discs share = 6 lines



D:\FilmsHD\ -readonly -name:FilmsHD 192.168.0.37
E:\FilmsHD2 -readonly -name:FilmsHD2 192.168.0.37
F:\FilmsHD3 -readonly -name:FilmsHD3 192.168.0.37
I:\FilmsHD4 -readonly -name:FilmsHD4 192.168.0.37
J:\FilmsHD5 -readonly -name:FilmsHD5 192.168.0.37
T:\FilmsHD6 -readonly -name:FilmsHD6 192.168.0.37


translation:

( D:\FilmsHD = partition concerned example)
( 192.168.0.37 = ip of Mede8er  )

once that is done, save made ​​and restart server ..

effect



then made ​​to complete OK.

Offline spaceghost2000

  • Newbie
  • Posts: 18
  • Helpful Contribution Status: +0/-0
Re: [TUTORIALS] NFS server For Windows - HaneWIN -
« Reply #1 on: August 14, 2013, 07:50:42 PM »
Thanks Wool. Very helpful!  Just a point of clarification, unless you have UAC disabled (or your profile is set to admin privileges) you'll need to right-click and run Hanewin as Admin to make any changes to the exports file.  I believe for those folks streaming 3D they should set the Maximum NFS Transfer Size to 32768 on the first tab. You can also set an IP range for authorized clients instead of a single IP (D:\FilmsHD\ -readonly -name:FilmsHD 192.168.0.1 192.168.0.250) for instance. I don't use a static IP on my 1000X3D so it helps to open the entire range up.

Offline myname70

  • Active Member
  • *
  • Posts: 82
  • Helpful Contribution Status: +0/-0
Re: [TUTORIALS] NFS server For Windows - HaneWIN -
« Reply #2 on: October 22, 2013, 06:26:14 PM »
How to share the local drive/folder? By Properties - Share --? I did it, but the MED1000 still not see the E: disk on my desktop.. (I stop the Firewall etc.. but still doe snot work..)

Offline jer1956

  • Global Moder8or
  • M8er Addict
  • *****
  • Posts: 17 402
  • Helpful Contribution Status: +203/-55
Re: [TUTORIALS] NFS server For Windows - HaneWIN -
« Reply #3 on: October 22, 2013, 07:19:45 PM »
How to share the local drive/folder? By Properties - Share --? I did it, but the MED1000 still not see the E: disk on my desktop.. (I stop the Firewall etc.. but still doe snot work..)

You edit the exports files by pressing the Edit Exports button.  It is not controlled by the Samba sharing controls embedded in widows GUI.

Offline myname70

  • Active Member
  • *
  • Posts: 82
  • Helpful Contribution Status: +0/-0
Re: Re: Re: [TUTORIALS] NFS server For Windows - HaneWIN -
« Reply #4 on: October 22, 2013, 07:37:22 PM »
You edit the exports files by pressing the Edit Exports button.  It is not controlled by the Samba sharing controls embedded in widows GUI.

Thanks. I did this way and shared the whole.drive e:... but MED1000 still cannot see it over nfs.. I keep the windows firewall off.... restarted the router and pc. . No success.  I have Win 8.1 64 bit version


Sent from my GT-I9505 using Tapatalk 2

Offline jer1956

  • Global Moder8or
  • M8er Addict
  • *****
  • Posts: 17 402
  • Helpful Contribution Status: +203/-55
Re: [TUTORIALS] NFS server For Windows - HaneWIN -
« Reply #5 on: October 22, 2013, 08:35:19 PM »
to b e honest the original guide tells you   more..such  as how to add services to  the firewall.


http://www.mede8erforum.com/index.php/topic,10625.0.html

You cannot leave the readonly flag in place. 

That is not used in the original guide deliberately.
« Last Edit: November 19, 2013, 09:34:28 AM by jer1956 »