Author Topic: Installing the Firmware  (Read 13702 times)

Offline mede8erEU

  • B8a Tester - X3D Movie Scraper
  • Newbie
  • ****
  • Posts: 17
  • Helpful Contribution Status: +0/-0
Installing the Firmware
« on: April 25, 2013, 07:41:09 am »
(Works on all Mede8er models)

1) Plug a USB-drive or SD-card into your PC
2) Right-click on the USB-drive/SD-card and choose "Format"

3) Format the USB-drive/SD-card with the "FAT32" filesystem

Note: Make sure you have a backup of the data on the USB-drive/SD-card

4) Download the latest firmware and save the file


5) Unpack the file with a Unrar/Unzip program like the free Rarzilla

6) only copy the install.img file to the empty USB/drive-SD/card

7) Remove the USB-drive/SD-card from the pc and place it in a free USB-port on the Mede8er
8 ) Make sure the player is in "Standby" mode
9) Hold down the On/Off button on the front of the Mede8er for 10 to 15 seconds

Within 30 seconds you'll see the progress bar.
The Mede8er will automatically reboot after the update process has completed

Offline lekash

  • Newbie
  • Posts: 30
  • Helpful Contribution Status: +0/-0
Re: Installing the Firmware
« Reply #1 on: August 09, 2013, 03:44:53 am »
same procedure for the new ONE STEP UPDATER, right?

Offline Maasbommel

  • Global Moder8or
  • M8er Addict
  • *****
  • Posts: 11 503
  • Helpful Contribution Status: +51/-8
Re: Re: Installing the Firmware
« Reply #2 on: August 09, 2013, 05:58:27 am »
Right.
Read the  Mede8er 400X/500X Beginners Guide
or Mede8er 500X2/400X2/450X2 Beginners Guide

Also check the Couto X3D Newbies Guide first.

Please don't PM me but post on the forum.